Building Board of Appeals

Agenda Village of Glen Ellyn Building Board of Appeals Meeting Wednesday, January 19, 2022 7:00 PM Glen Ellyn Civic Center, Galligan Board Room A. Call to Order: 7:00 p.m. B. Roll Call C. Public Comments (Non-agenda Items) D. Approval of Draft Minutes 1) Minutes, Regular Meeting – 12/15/21 E. Old Business • Update on the Building Community Listening Sessions - There is no update this month due to staff illnesses and the holidays. We hope to have an update at the next meeting. F. New Business • Review of codes regulating property maintenance and construction for potential adoption G. Trustee Report H. Chairman’s Report I. Staff Liaison’s Report J. Next Meeting Date: February 16, 2022 K. Adjournment Page 1 of 59 cc: Building Board of Appeals Members Kelley Kalinich, Trustee Liaison Staci Springer, Community Development Director Emily Rodman, Assistant Village Manager Kelly Purvis, Planning Manager Atrin Fard, Planner BBA Recording Secretary Lori Gloude, Administrative Assistant II Brian Baltudis, Facilities Manager Dear Interested Citizens: This note provides you with information regarding the process of amending the Village Code. Once public comments, discussions and considerations have been completed, the Building Board of Appeals makes a recommendation to the Village Board. The recommendation, along with the meeting minutes, summary report and all related material, is then scheduled for consideration by the Village Board at one or two meetings. The recommendation may first be considered by the Village Board at a workshop meeting, which will be held on a Monday at 7:00 p.m. The recommendation may then be considered at a formal meeting of the Village Board at 7:00 p.m., for a formal decision. To confirm exact dates for these Village Board meetings, please call 630-547-5244. The Village Board meets in the Galligan Board Room on the third floor of the Civic Center, 535 Duane Street. Individuals with disabilities who plan to attend the hearing and who require certain accommodations in order to allow them to observe and participate, or who have questions regarding the accessibility of the meeting or facilities, are requested to contact the Village at least 24 hours before the meeting. Page 2 of 59  Glen Ellyn Building Board of Meeting 1/19/2022 7:00 PM Appeals Department: Community Development 535 Duane Street Department Head: Staci Springer Glen Ellyn, IL 60137 Category: Minutes Prepared By: Steve Witt AGENDA ITEM (ID DOC ID: 2022-1791 # 2022-1791) Minutes, Regular Meeting - 12/15/21 Statement of the Issue: NA Analysis: NA Budget Impact: NA Action Requested: NA Attachments: 1. Draft Minutes - 121521 Meeting Page 3 of 59 Page 4 of 59 Page 5 of 59 Page 6 of 59 Page 7 of 59  Glen Ellyn Building Board of Meeting 1/19/2022 7:00 PM Appeals Department: Community Development 535 Duane Street Department Head: Glen Ellyn, IL 60137 Category: Discussion Item Prepared By: AGENDA ITEM (ID # 2022- DOC ID: 2022-1792 1792) Update on the Building Community Listening Sessions - There is no update this month due to staff illnesses and the holidays. We hope to have an update at the next meeting. Statement of the Issue: Analysis: Budget Impact: Action Requested: Attachments: Page 8 of 59  Glen Ellyn Building Board Meeting 1/19/2022 7:00 PM of Appeals Department: Community Development 535 Duane Street Department Head: Staci Springer Glen Ellyn, IL 60137 Category: Discussion Item Prepared By: Steve Witt AGENDA ITEM (ID DOC ID: 2022-1793 # 2022-1793) Review of codes regulating property maintenance and construction for potential adoption Statement of the Issue: See attached Staff Report & Attachments Analysis: See attached Staff Report & Attachments Budget Impact: NA Action Requested: See attached Staff Report & Attachments Attachments: 1. Building Codes Upgrade Staff Report - Meeting 3 - 01-19-22 2. Attachment IPMC-1 - Existing Amendments 3. Attachment IPMC-2 - Proposed Amendments (Redlined) 4. Attachment IPMC-3 - Proposed Amendments (Clean) 5. Attachment IPMC-4 - Major Changes 6. Attachment LSC-1 - Existing Amendments 7. Attachment LSC-2 - Proposed Amendments (Redlined) 8. Attachment LSC-3 - Proposed Amendments (Clean) 9. Attachment LSC-4 -OSFM Correspondence 10. Attachment IMC-1 - Existing IMC Amendments 11. Attachment IMC-2 - Proposed IMC Amendments (Redlined) 12. Attachment IMC-3 - Proposed IMC Amendments (Clean) 13. Attachment IMC-4 - Major Changes 14. Attachment IFGC-1 - Existing IFGC Amendments 15. Attachment IFGC-2 - Proposed IFGC Amendments (Redlined) 16. Attachment IFGC-3 - Proposed IFGC Amendments (Clean) 17. Attachment IFGC-4 - Major Changes Page 9 of 59  MEMORANDUM TO: Chairman Bredfeldt and Members of the Building Board of Appeals Kelley Kalinich, Trustee Liaison FROM: Steve Witt, Building & Zoning Official CC: Staci Springer, Community Development Director DATE: January 14, 2022 RE: Building Codes Upgrade BBA Meeting 01/19/22 The next items for the Building Board of Appeals to consider at the meeting to be held on January 19, 2022 include the review of the following codes. • International Property Maintenance Code, 2018 (IPMC) Continuation of review from the December 15, 2021 meeting of the BBA • NFPA 101, Life Safety Code, 2015 (LSC) The 2008 edition of the LSC is currently enforced within the Village • International Mechanical Code, 2018 (IMC) The 2009 edition of the IMC is currently enforced within the Village • International Fuel Gas Code, 2018 (IFGC) The 2009 edition of the IFGC is currently enforced within the Village A summary of the scope of each of the codes to be reviewed is below. We have prepared attachments related to each of these codes which will assist us in walking through all the proposed amendments. Specifically, the attachments to this memorandum include the following: 1. A copy of the currently adopted amendments to the codes being reviewed that are already in effect. 2. A summary indicating the major revisions to the each of the published code editions from our currently adopted edition to the proposed edition. The summary includes the major changes for each of the updates so we can understand the full scope of the changes since the 2009 editions. The highlights on the summaries indicate what changes are deemed to have the most impact on construction within the Village. We recommend concentrating on those changes during any discussions. 3. A “Redlined” version of the current amendments indicating the addition, deletions or modification to the existing amendments that are proposed by staff for discussion and consideration by the BBA. X:\Plandev\Witt\2018 Code Upgrade\Meeting 3\Building Codes Upgrade Staff Report - Meeting 3 - 01-19-22.docx Page 1 of 14 Page 10 of 59  4. A “Clean” version of the combined existing and proposed amendments which eliminates the struck-thorough verbiage contained in the Redlined version to make for easier reading and reference. 5. Other attachments as deemed necessary to provide information for consideration by the BBA in their deliberation on the proposed codes. The International Code Council and the National Fire Protection Association (NFPA) provide free online access for viewing of their codes. The International Codes can be viewed on the International Code Council’s website through the following URLs: International Property Maintenance Code: https://codes.iccsafe.org/content/IPMC2018/preface International Mechanical Code: https://codes.iccsafe.org/content/IMC2015CU/copyright International Fuel Gas Code: https://codes.iccsafe.org/content/IFGC2015/preface The NFPA 101, Life Safety Code can be viewed on the NFPA’s website through the following URL. https://www.nfpa.org/codes-and-standards/all-codes-and-standards/list-of-codes-and- standards/detail?code=101 At the meeting, we will provide further background for the reasoning behind each of the proposed amendments and adoptions as well as the proposed deletion or modification of existing amendments. If we are unable to finish reviewing any of the codes, we can continue review of them to a future meeting. X:\Plandev\Witt\2018 Code Upgrade\Meeting 3\Building Codes Upgrade Staff Report - Meeting 3 - 01-19-22.docx Page 2 of 14 Page 11 of 59 Scope of Codes: International Property Maintenance Code, 2018 Note: The following information related to the International Property Maintenance Code is repeated from the packet that was distributed for the December 15, 2021 meeting. This information was gleaned from the IMC but is not necessarily repeated here verbatim. The International Property Maintenance Code (IPMC) is a model code that regulates the minimum maintenance requirements for existing buildings. It establishes the minimum maintenance standards for basic equipment, light, ventilation, heating, sanitation and fire safety for all existing residential and nonresidential structures and all existing premises. Responsibility is fixed among owners, operators, and occupants for code compliance. The IPMC provides for the regulation and safe use of existing structures in the interest of the social and economic welfare of the community. The following is a chapter-by-chapter synopsis of the scope and intent of the provisions of the International Property Maintenance Code as repeated, though not verbatim, from the preface of the 2018 IPMC. Chapter 1 Scope and Administration. This chapter contains provisions for the application, enforcement and administration of subsequent requirements of the code. In addition to establishing the scope of the code, Chapter 1 identifies which buildings and structures come under its purview. Chapter 1 is largely concerned with maintaining “due process of law” in enforcing the property maintenance criteria contained in the body of the code. Chapter 2 Definitions. All terms that are defined in the code are listed alphabetically in Chapter 2. While a defined term may be used in one chapter or another, the meaning provided in Chapter 2 is applicable throughout the code. Chapter 3 General Requirements. Chapter 3, “General Requirements,” is broad in scope. It includes a variety of requirements for the exterior property areas as well as the interior and exterior elements of the structure. This chapter provides requirements that are intended to maintain a minimum level of safety and sanitation for both the general public and the occupants of a structure, and to maintain a building’s structural and weather-resistance performance. Chapter 3 provides specific criteria for regulating the installation and maintenance of specific building components; maintenance requirements for vacant structures and land; requirements regulating the safety, sanitation and appearance of the interior and exterior of structures and all exterior property areas; accessory structures; vehicle storage regulations and establishes who is responsible for complying with the chapter’s provisions. This chapter also contains the requirements for swimming pools, spas and hot tubs and the requirements for protective barriers and gates in these barriers. Chapter 3 establishes the responsible parties for exterminating insects and rodents and maintaining sanitary conditions in all types of occupancies. X:\Plandev\Witt\2018 Code Upgrade\Meeting 3\Building Codes Upgrade Staff Report - Meeting 3 - 01-19-22.docx Page 3 of 14 Page 12 of 59  Chapter 4 Light, Ventilation and Occupancy Limitations. The purposes of Chapter 4 are to establish the minimum environment for occupiable and habitable buildings, by establishing the minimum criteria for light and ventilation and identifying occupancy limitations including minimum room width and area, minimum ceiling height and restrictions to prevent overcrowding. This chapter also provides for alternative arrangements of windows and other devices to comply with the requirements for light and ventilation and prohibits certain room arrangements and occupancy uses. Witt commentary: The addition of occupancy limitation requirements for dwelling units to the 2018 edition of the code is perhaps the most significant change from previous editions. Many municipalities have previously struggled with the concern of overcrowding unless they wrote their own code to regulate the number of persons allowed to occupy dwelling units. The occupancy limitation provisions will provide a uniform approach to addressing occupancy loads across communities that have adopted the IPMC. Chapter 5 Plumbing Facilities and Fixture Requirements. Chapter 5 establishes the minimum criteria for the installation, maintenance and location of plumbing systems and facilities, including the water supply system, water heating appliances, sewage disposal system and related plumbing fixtures. Sanitary and clean conditions in occupied buildings are dependent upon certain basic plumbing principles, including providing potable water to a building, providing the basic fixtures to effectively utilize that water, and properly removing waste from the building. Chapter 5 establishes the minimum criteria to verify that these principles are maintained throughout the life of a building. Chapter 6 Mechanical and Electrical Requirements. Chapter 6 establishes minimum criteria for the installation and maintenance of the following: heating and air-conditioning equipment, appliances and their supporting systems; water heating equipment, appliances and systems; cooking equipment and appliances; ventilation and exhaust equipment; gas and liquid fuel distribution piping and components; fireplaces and solid fuel-burning appliances; chimneys and vents; electrical services; lighting fixtures; electrical receptacle outlets; electrical distribution system equipment, devices and wiring; and elevators, escalators and dumbwaiters. Chapter 7 Fire Safety Requirements. The purpose of Chapter 7 is to address those fire hazards that arise as the result of a building’s occupancy. It also provides minimum requirements for fire safety issues that are most likely to arise in older buildings. This chapter contains requirements for means of egress in existing buildings, including path of travel, required egress width, means of egress doors and emergency escape openings. Chapter 7 establishes the minimum requirements for fire safety facilities and fire protection systems, as these are essential fire safety systems. Chapter 8 Referenced Standards. The code contains numerous references to standards that are used to regulate materials and methods of construction. Chapter 8 contains a comprehensive list of all standards that are referenced in the code. The standards are part of the code to the extent of the reference to the standard. Compliance with the referenced standard is necessary for compliance with this code. X:\Plandev\Witt\2018 Code Upgrade\Meeting 3\Building Codes Upgrade Staff Report - Meeting 3 - 01-19-22.docx Page 4 of 14 Page 13 of 59 NFPA 101, Life Safety Code, 2015 The purpose of the NFPA 101, Life Safety Code, (LSC) is to provide minimum requirements, with due regard to function, for the design, operation and maintenance of building and structures for safety to life from fire. The LSC was previously adopted by the Village since that code was adopted by the Office of the Illinois State Fire Marshal (OSFM) pursuant to 425 ILCS 25/9 which required the State Fire Marshal to adopt and promulgate rules to protect the public from fire hazards. The 2009 edition of the LSC was adopted by the Village after the OSFM adopted it as the State Fire Code. In previous years, although the OSFM indicated that a municipality must adopt a Fire Code that was equivalent to the LSC, the OSFM never recognized the International Fire Code as being equivalent to the LSC in terms of providing protection against fire hazards. Therefore, when the State adopted the 2009 LSC, the Village followed suit. On December 21, 2021, Matt Perez, State Fire Marshal, issued a letter to all Local Municipal and Governmental Authorities in which he indicated that, “For home rule municipalities, the municipality can opt either to adopt fire prevention and life safety standards of its own choosing or to follow the OSFM-adopted NFPA 101, Life Safety Code (2015 Edition). Notwithstanding the above, the OSFM-adopted life safety code still applies to state buildings, state-licensed facilities, and other occupancies under the purview of OSFM that are located in home rule municipalities.” As indicated in the attached correspondence from the State Fire Marshal (Attachment LSC-4), while the OSFM is required by law to inspect all state public buildings, public schools, and occupancies licensed by the state, its jurisdiction to inspect private and commercial occupancies is concurrent with the local fire company. Regarding occupancies under the purview of the OSFM, we note, • There are no state public buildings located within the Village of Glen Ellyn. • There are few state-licensed facilities located within the Village of Glen Ellyn, including, o The Illinois Department of Children and Family Services, general offices o Arden Courts of Glen Ellyn, Skilled Nursing Facility o Brookdale, Assisted Living Facility o Maple Glen, Assisted Living Facility o Atria Park of Glen Ellyn, Assisted Living Facility o Chart Senior Living of Glen Ellyn, Assisted Living Facility The Village enforces the locally adopted building and fire codes, whereas the OSFM enforces the LSC. • Day care facilities are inspected by both the Village and the OSFM. The Village enforces the locally adopted building and fire codes, whereas the OSFM enforces the LSC. • Public elementary and secondary schools are inspected by the Office of the State Fire Marshal; however, the OSFM cannot enforce the OSFM-adopted NFPA 101, Life Safety Code on the X:\Plandev\Witt\2018 Code Upgrade\Meeting 3\Building Codes Upgrade Staff Report - Meeting 3 - 01-19-22.docx Page 5 of 14 Page 14 of 59  schools. The Illinois State Board of Education (ISBE) maintains jurisdiction within these school buildings. The ISBE has adopted specific fire safety rules and regulations applicable to public schools, which include Title 23, Part 175 or Part 185, of the Illinois Administrative Code, some version of the old BOCA Code, or some version of the International Building Code (IBC) or the International Fire Code (IFC). The Village inspects these buildings with respect to these codes. • Private schools located in a home rule municipality, such as the Village of Glen Ellyn, are governed by the locally adopted building and fire codes. Many sections of the LSC have requirements that differ from the Village’s Fire Code, particularly as related to existing buildings. Some requirements are more, and some are less strict. Adoption of the LSC by the Village will only lead to conflict when trying to determine which code to follow in a given circumstance. Therefore, adoption of the LSC is not recommended. X:\Plandev\Witt\2018 Code Upgrade\Meeting 3\Building Codes Upgrade Staff Report - Meeting 3 - 01-19-22.docx Page 6 of 14 Page 15 of 59 International Mechanical Code, 2018 Note: This information below, related to the International Mechanical Code, was gleaned from the code but is not necessarily repeated here verbatim. The International Mechanical Code (IMC) is a model code that regulates the design and installation of mechanical systems, appliances, appliance venting, duct and ventilation systems, combustion air provisions, hydronic systems, and solar systems. The purpose of the code is to establish the minimum acceptable level of safety and to protect life and property from the potential dangers associated with the installation and operation of mechanical systems. The code also protects the personnel that install, maintain, service and replace the systems and appliances addressed by this code. The IMC is primarily a prescriptive code with some performance text. The code relies heavily on product specifications and listings to provide much of the appliance and equipment installation requirements. The general Section 105.2 and the exception to Section 403.2 allow designs and installations to be performed by approved engineering methods as alternatives to the prescriptive methods in the code. The following is a chapter-by-chapter synopsis of the scope and intent of the provisions of the International Mechanical Code as repeated, though not verbatim, from the preface of the 2018 IMC. Chapter 1 Scope and Administration. Chapter 1 establishes the limits of applicability of the code and describes how the code is to be applied and enforced. A mechanical code, like any other code is intended to be adopted as a legally enforceable document and it cannot be effective without adequate provisions for its administration and enforcement. The provisions of Chapter 1 establish the authority and duties of the code official appointed by the jurisdiction having authority and establish the rights and privileges of the design professional, contractor, and property owner. Chapter 2 Definitions. Chapter 2 is the repository of the definitions of terms used in the body of the code. Codes are technical documents, and every word and term can impact the meaning of the code text and the intended results. The code often uses terms that have a unique meaning in the code and the code meaning can differ substantially from the ordinarily understood meaning of the term as used outside of the code. The terms defined in Chapter 2 are deemed to be of prime importance in establishing the meaning and intent of the code text that uses the terms. The user of the code should be familiar with and consult this chapter because the definitions are essential to the correct interpretation of the code and because the user may not be aware that a term is defined. Chapter 3 General Regulations. Chapter 3 contains broadly applicable requirements related to appliance location and installation, appliance and systems access, protection of structural elements, condensate disposal and clearances to combustibles, among others. X:\Plandev\Witt\2018 Code Upgrade\Meeting 3\Building Codes Upgrade Staff Report - Meeting 3 - 01-19-22.docx Page 7 of 14 Page 16 of 59  Chapter 4 Ventilation. Chapter 4 includes means for protecting building occupant health by controlling the quality of indoor air and protecting property from the effects of inadequate ventilation. In some cases, ventilation is required to prevent or reduce a health hazard by removing contaminants at their source. Ventilation is both necessary and desirable for the control of air contaminants, moisture and temperature. Habitable and occupiable spaces are ventilated to promote a healthy and comfortable environment for the occupants. Uninhabited and unoccupied spaces are ventilated to protect the building structure from the harmful effects of excessive humidity and heat. Ventilation of specific occupancies is necessary to minimize the potential for toxic or otherwise harmful substances to reach dangerously high concentrations in air. Chapter 5 Exhaust Systems. Chapter 5 provides guidelines for reasonable protection of life, property and health from the hazards associated with exhaust systems, air contaminants and smoke development in the event of a fire. In most cases, these hazards involve materials and gases that are flammable, explosive, toxic or otherwise hazardous. Where contaminants are known to be present in quantities that are irritating or harmful to the occupants’ health or are hazardous in a fire, both naturally and mechanically ventilated spaces must be equipped with mechanical exhaust systems capable of collecting and removing the contaminants. This chapter contains requirements for the installation of exhaust systems, with an emphasis on the structural integrity of the systems and equipment involved and the overall impact of the systems on the fire safety performance of the building. It includes requirements for the exhaust of commercial kitchen grease- and smoke-laden air, hazardous fumes and toxic gases, clothes dryer moisture and heat and dust, stock and refuse materials. Chapter 6 Duct Systems. Chapter 6 of the code regulates the materials and methods used for constructing and installing ducts, plenums, system controls, exhaust systems, fire protection systems and related components that affect the overall performance of a building’s air distribution system and the reasonable protection of life and property from the hazards associated with air-moving equipment and systems. This chapter contains requirements for the installation of supply, return and exhaust air systems. Specific exhaust systems are also addressed in Chapter 5. Information on the design of duct systems is limited to that in Section 603.2. The code is very much concerned with the structural integrity of the systems and the overall impact of the systems on the fire safety and life safety performance of the building. Design considerations such as duct sizing, maximum efficiency, cost effectiveness, occupant comfort and convenience are the responsibility of the design professional. The provisions for the protection of duct penetrations of wall, floor, ceiling, and roof assemblies are extracted from the International Building Code. Chapter 7 Combustion Air. Complete combustion of solid and liquid fuel is essential for the proper operation of appliances, for control of harmful emissions and for achieving maximum fuel efficiency. The specific combustion air requirements provided in previous editions of the code have been X:\Plandev\Witt\2018 Code Upgrade\Meeting 3\Building Codes Upgrade Staff Report - Meeting 3 - 01-19-22.docx Page 8 of 14 Page 17 of 59  deleted in favor of a single section that directs the user to NFPA 31 for oil-fired appliance combustion air requirements and the manufacturer’s installation instructions for solid-fuel burning appliances. For gas-fired appliances, the provisions of the International Fuel Gas Code are applicable. Chapter 8 Chimneys and Vents. Chapter 8 is intended to regulate the design, construction, installation, maintenance, repair and approval of chimneys, vents, and their connections to solid and liquid fuel-burning appliances. The requirements of this chapter are intended to achieve the complete removal of the products of combustion from fuel-burning appliances and equipment. This chapter includes regulations for the proper selection, design, construction, and installation of a chimney or vent, along with appropriate measures to minimize the related potential fire hazards. A chimney or vent must be designed for the type of appliance or equipment it serves. Chimneys and vents are designed for specific applications depending on the flue gas temperatures and the type of fuel being burned in the appliance. Chimneys and vents for gas-fired appliances are covered in the International Fuel Gas Code. Chapter 9 Specific Appliances, Fireplaces and Solid Fuel-burning Equipment. Chapter 9 sets minimum construction and performance criteria for fireplaces, appliances, and equipment and provides for the safe installation of these items. It reflects the code’s intent to specifically address all the types of appliances that the code intends to regulate. Other regulations affecting the installation of solid fuel-burning fireplaces, appliances and accessory appliances are found in Chapters 3, 6, 7, 8, 10, 11, 12, 13 and 14. Chapter 10 Boilers, Water Heaters and Pressure Vessels. Chapter 10 presents regulations for the proper installation of boilers, water heaters and pressure vessels to protect life and property from the hazards associated with those appliances and vessels. It applies to all types of boilers and pressure vessels, regardless of size, heat input, operating pressure, or operating temperature. Because pressure vessels are closed containers designed to contain liquids, gases, or both under pressure, they must be designed and installed to prevent structural failures that can result in extremely hazardous situations. Certain safety features are therefore provided in Chapter 10 to reduce the potential for explosion hazards. Chapter 11 Refrigeration. Chapter 11 contains regulations pertaining to the life safety of building occupants. These regulations establish minimum requirements to achieve the proper design, construction, installation, and operation of refrigeration systems. Refrigeration systems are a combination of interconnected components and piping assembled to form a closed circuit in which a refrigerant is circulated. The system’s function is to extract heat from a location or medium, and to reject that heat to a different location or medium. This chapter establishes reasonable safeguards for the occupants by defining and mandating practices that are consistent with the practices and experience of the industry. Chapter 12 Hydronic Piping. Hydronic piping includes piping, fittings and valves used in building space conditioning systems. Applications include hot water, chilled water, steam, steam condensate, brines, and water/antifreeze mixtures. Chapter 12 contains the provisions that govern the construction, installation, alteration, and repair of all hydronic piping systems that affect reliability, serviceability, energy efficiency and safety. X:\Plandev\Witt\2018 Code Upgrade\Meeting 3\Building Codes Upgrade Staff Report - Meeting 3 - 01-19-22.docx Page 9 of 14 Page 18 of 59  Chapter 13 Fuel Oil Piping and Storage. Chapter 13 regulates the design and installation of fuel oil storage and piping systems. The regulations include reference to construction standards for above-ground and underground storage tanks, material standards for piping systems (both aboveground and underground) and extensive requirements for the proper assembly of system piping and components. The International Fire Code (IFC) covers subjects not addressed in detail here. The provisions in this chapter are intended to prevent fires, leaks and spills involving fuel oil storage and piping systems. Chapter 14 Solar Thermal Systems. Chapter 14 establishes provisions for the safe installation, operation and repair of solar energy systems used for space heating or cooling, domestic hot water heating or processing. Although such systems use components similar to those of conventional mechanical equipment, many of these provisions are unique to solar energy systems. Chapter 15 Referenced Standards. Chapter 15 lists all the product and installation standards and codes that are referenced throughout Chapters 1 through 14. As stated in Section 102.8, these standards and codes become an enforceable part of the code (to the prescribed extent of the reference) as if printed in the body of the code. Chapter 15 provides the full title and edition year of the standards and codes in addition to the address of the promulgators and the section numbers in which the standards and codes are referenced. Staff is not recommending any amendments to the technical requirements of the IMC. The amendments presented serve to upgrade the edition of the code and strike the same sections that were struck in the previous adoption. The sections stricken from the code are not required as they are contained in the Residential and Building Codes, both of which will be reviewed by the BBA at a future meeting. X:\Plandev\Witt\2018 Code Upgrade\Meeting 3\Building Codes Upgrade Staff Report - Meeting 3 - 01-19-22.docx Page 10 of 14 Page 19 of 59 International Fuel Gas Code, 2018 Note: This information below, related to the International Fuel Gas Code, was gleaned from the code but is not necessarily repeated here verbatim. The International Fuel Gas Code (IFGC) is a model code that regulates the design and installation of fuel gas distribution piping and systems, appliances, appliance venting systems, combustion air provisions, gaseous hydrogen systems and motor vehicle gaseous-fuel-dispensing stations. The definition of fuel gas includes natural, liquefied petroleum and manufactured gases and mixtures of these gases. The purpose of the code is to establish the minimum acceptable level of safety and to protect life and property from the potential dangers associated with the storage, distribution, and usage of fuel gases and the byproducts of combustion of such fuels. The code also protects the personnel that install, maintain, service and replace the systems and appliances addressed by this code. Except for Section 401.1.1, the IFGC does not address utility-owned piping and equipment (i.e., anything upstream of the point of delivery). See the definition of “Point of delivery” and Section 501.8 for other code coverage exemptions. The IFGC is primarily a specification-oriented (prescriptive) code with some performance-oriented text. For example, Section 503.3.1 is a performance statement, but Chapter 5 contains prescriptive requirements that will cause Section 503.3.1 to be satisfied. The IFGC applies to all occupancies including one- and two-family dwellings and townhouses. The IRC is referenced for coverage of one- and two-family dwellings and townhouses; however, in effect, the IFGC provisions are still applicable because the fuel gas chapter in the IRC (Chapter 24) is composed entirely of text extracted from the IFGC. Therefore, whether using the IFGC or the IRC, the fuel gas provisions will be identical. The IFGC does not apply to piping systems that operate at pressures in excess of 125 psig for natural gas and 20 psig for LP-gas (note exception in Section 402.7). The general Section 105.2 and the specific Sections 304.8, 402.3, 503.5.5 and 503.6.10 allow combustion air provisions, pipe sizing and chimney and vent sizing to be performed by approved engineering methods as alternatives to the prescriptive methods in the code. The following is a chapter-by-chapter synopsis of the scope and intent of the provisions of the International Fuel Gas Code as repeated, though not verbatim, from the preface of the 2018 IFGC. Chapter 1 Scope and Administration. Chapter 1 establishes the limits of applicability of the code and describes how the code is to be applied and enforced. A fuel gas code, like any other code, is intended to be adopted as a legally enforceable document, and it cannot be effective without adequate provisions for its administration and enforcement. The provisions of Chapter 1 X:\Plandev\Witt\2018 Code Upgrade\Meeting 3\Building Codes Upgrade Staff Report - Meeting 3 - 01-19-22.docx Page 11 of 14 Page 20 of 59  establish the authority and duties of the code official appointed by the authority having jurisdiction and establish the rights and privileges of the design professional, contractor, and property owner. Chapter 2 Definitions. Chapter 2 is the repository of the definitions of terms used in the body of the code. Codes are technical documents, and every word, term and punctuation mark can impact the meaning of the code text and the intended results. The code often uses terms that have a unique meaning in the code and the code meaning can differ substantially from the ordinarily understood meaning of the term as used outside of the code. The terms defined in Chapter 2 are deemed to be of prime importance in establishing the meaning and intent of the code text that uses the terms. The user of the code should be familiar with and consult this chapter because the definitions are essential to the correct interpretation of the code and because the user may not be aware that a term is defined. Chapter 3 General Regulations. Chapter 3 contains broadly applicable requirements related to appliance location and installation, appliance and systems access, protection of structural elements and clearances to combustibles, among others. This chapter also covers combustion air provisions for gas-fired appliances. Chapter 4 Gas Piping Installations. Chapter 4 covers the allowable materials for gas piping systems and the sizing and installation of such systems. It also covers pressure regulators, appliance connections and overpressure protection devices. Gas piping systems are sized to supply the maximum demand while maintaining the supply pressure necessary for safe operation of the appliances served. Chapter 5 Chimneys and Vents. Chapter 5 regulates the design, construction, installation, maintenance, repair and approval of chimneys, vents, venting systems, and their connections to gas-fired appliances. Properly designed chimneys, vents and venting systems are necessary to conduct to the outdoors the flue gases produced by the combustion of fuels in appliances. The provisions of this chapter are intended to minimize the hazards associated with high temperatures and potentially toxic and corrosive combustion gases. This chapter addresses all the factory-built and site-built chimneys, vents, and venting systems used to vent all types and categories of appliances. It also addresses direct-vent appliances, integral vent appliances, side- wall mechanically vented appliances and exhaust hoods that convey the combustion byproducts from cooking and other process appliances. Chapter 6 Specific Appliances. Chapter 6 addresses specific appliances that the code intends to regulate. Each main section applies to a unique type of gas-fired appliance and specifies the product standards to which the appliance must be listed. The general requirements found in the previous Chapters 1 through 5 also apply and the sections in Chapter 6 add the special requirements that are specific to each type of appliance. Chapter 7 Gaseous Hydrogen Systems. Chapter 7 is specific to gaseous hydrogen generation, storage, distribution and utilization systems, appliances, and equipment. Note that hydrogen is not within the definition of “Fuel gas,” but it is, nonetheless, commonly used as a fuel for fuel- cell power generation and fuel-cell powered motor vehicles. The scope of Chapter 7 is not X:\Plandev\Witt\2018 Code Upgrade\Meeting 3\Building Codes Upgrade Staff Report - Meeting 3 - 01-19-22.docx Page 12 of 14 Page 21 of 59  limited to any particular use of hydrogen (see Sections 633 and 635). Hydrogen systems have unique potential hazards because of the specific gravity of the gas, its chemical effect on materials and the fact that it is not odorized. Chapter 8 Referenced Standards. Chapter 8 lists all the product and installation standards and codes that are referenced throughout Chapters 1 through 7. As stated in Section 102.8, these standards and codes become an enforceable part of the code (to the prescribed extent of the reference) as if printed in the body of the code. Chapter 8 provides the full title and edition year of the standards and codes in addition to the address of the promulgators and the section numbers in which the standards and codes are referenced. Staff is not recommending any amendments to the technical requirements of the IFGC. The amendments presented serve to upgrade the edition of the code and strike the same sections that were struck in the previous adoption. The sections stricken from the code are not required as they are contained in the Residential and Building Codes, both of which will be reviewed by the BBA at a future meeting. X:\Plandev\Witt\2018 Code Upgrade\Meeting 3\Building Codes Upgrade Staff Report - Meeting 3 - 01-19-22.docx Page 13 of 14 Page 22 of 59 Recommendations: 1. We recommend that the Building Board of Appeals approve a motion to delete the following code from the Village Code. o NFPA 101, Life Safety Code, 2009. Adoption of the 2015 edition of this code is not recommended. 2. We recommend that the Building Board of Appeals approve a motion to adopt the following codes as may be amended through discussion at the January 19, 2022 meeting. o International Property Maintenance Code, 2018 o International Mechanical Code, 2018 o International Fuel Gas Code, 2018 Att: Attachment IPMC-1: Property Maintenance Code – Existing Amendments Attachment IPMC-2: Property Maintenance Code – Proposed Amendments (Redlined) Attachment IPMC-3: Property Maintenance Code – Proposed Amendments (Clean) Attachment IPMC-4: Major changes to the International Property Maintenance Code Attachment LSC-1: Life Safety Code - Existing Amendments Attachment LSC-2: Life Safety Code - Proposed Amendments (Redlined) Attachment LSC-3: Life Safety Code - Proposed Amendments (Clean) Attachment LSC-4: Life Safety Code - OSFM Correspondence Attachment IMC-1: Mechanical Code - Existing Amendments Attachment IMC-2: Mechanical Code - Proposed Amendments (Redlined) Attachment IMC-3: Mechanical Code - Proposed Amendments (Clean) Attachment IMC-4: Major Changes to the International Mechanical Code Attachment IFGC-1: Fuel Gas Code - Existing Amendments Attachment IFGC-2: Fuel Gas Code - Proposed Amendments (Redlined) Attachment IFGC-3: Fuel Gas Code - Proposed Amendments (Clean) Attachment IFCG-4: Major Changes to the International Fuel Gas Code X:\Plandev\Witt\2018 Code Upgrade\Meeting 3\Building Codes Upgrade Staff Report - Meeting 3 - 01-19-22.docx Page 14 of 14 Page 23 of 59 Attachment IPMC-1 Property Maintenance Code – Existing Amendments 4-1-12. - Adoption of Property Maintenance Code. (A) The 2009 ICC International Property Maintenance Code is adopted by reference as the standards and regulations for the maintenance and occupancy of all existing property, buildings and structures as this Code is intended, recommended, maintained and published by the International Code Council except such portions thereof that are deleted, modified, or amended in this chapter. At least one copy of the ICC 2009 International Property Maintenance Code shall be maintained on file in the office of the Village Clerk for inspection and copying as a public record. (B) The provisions of the 2009 ICC International Property Maintenance Code are hereby deleted, modified and amended as follows: 1. Amend section 101.1 to read as follows: 101.1 Title. These regulations shall be known as the International Property Maintenance Code of the Village of Glen Ellyn, hereinafter referred to as "this Code". 2. Amend section 102.3 to read as follows: 102.3 Application of Other Codes. Repairs, additions or alterations to a structure, or changes of occupancy, shall be done in accordance with the procedures and provisions of the building and fire codes as adopted and amended by the Village of Glen Ellyn and nothing in this Code shall be constructed to cancel, modify or set aside any provision of the Illinois Code for safety to life from fire in buildings and structures (Life Safety Code), the Illinois Plumbing Code, the Illinois accessibility code, the Illinois energy conservation code or any other applicable rules or regulations established by the State of Illinois. 3. Amend section 102.7 to read as follows: 102.7 Referenced Codes And Standards. Exception: Wherever reference to the international Plumbing Code is made, substitute the Plumbing Code, department of public health, State of Illinois. Exception: Wherever reference to the international Zoning Code is made, substitute the Zoning Code, title 10 of the Glen Ellyn Village Code. Exception: All reference to the international existing Building Code shall be deleted. Exception: Wherever differences occur between provisions of this Code and the 2009 NFPA 101 Life Safety Code the most restrictive provisions shall apply. 4. Delete section 103.1 in its entirety and substitute the following: 103.1 General. Where referenced in this Code, the department of property maintenance shall be the planning and development department of the Village of Glen Ellyn and the Code Official shall be the Building and Zoning Official of the Village of Glen Ellyn. 5. Delete section 103.5 in its entirety. 6. Add new section 104.3.1 to read as follows: 104.3.1 Search Warrant. If the Code Official is refused entry after a reasonable attempt to obtain consent to enter the premises to make an inspection, the Code Official may seek in the circuit court of DuPage County a search warrant. An owner, occupant or other person in charge of a dwelling, structure or property subject to the provisions of this Code, who is presented with a search warrant obtained pursuant to this section, shall not refuse, impede, inhibit, interfere with, restrict or obstruct entry and free access to any part of the structure or premises where an inspection authorized by search warrant is sought to be made. X:\Plandev\Witt\2018 Code Upgrade\Meeting 3\Attachment IPMC-1 - Existing Amendments.docx Page 1 of 5 Page 24 of 59 Attachment IPMC-1 Property Maintenance Code – Existing Amendments 7. Delete section 106.4 in its entirety and substitute the following: 106.4 Violation Penalties. Any person who violates a provision of this Code shall, upon conviction thereof, be subject to a fine of not less than $50.00 nor more than $750.00 unless a fine for the violation of this Code is listed in the Glen Ellyn Village Code then the more stringent shall apply. Each day that a violation continues after due notice has been served shall be deemed a separate offense. 8. Add new section 108.2.2 to read as follows: 108.2.2 Closing Safeguards. Vacant structures that are ordered to be closed and secured shall have all doors, windows and openings completely covered and securely fastened with solid weather resistant material to temporarily prevent access to the premises. The covering material shall match or be painted to match the general color of the structure. 9. Amend section 109.5 to read as follows: 109.5 Cost Of Emergency Repairs And Temporary Safeguards. Costs incurred in the performance of emergency work and temporary safeguards shall be paid by the jurisdiction. The legal counsel of the jurisdiction shall institute appropriate action against the owner of the premises where the unsafe structure or condition is or was located for the recovery of such costs. 10. Delete section 111.2 in its entirety. 11. Delete section 111.3 in its entirety. 12. Delete section 111.4 in its entirety. 13. Delete section 111.5 in its entirety. 14. Delete section 111.6 in its entirety. 15. Delete section 111.7 in its entirety. 16. Amend section 112.4 to read as follows: 112.4 Failure To Comply. Any person who shall continue any work after having been served with a stop work order, except such work as that person is directed to perform to remove a violation or unsafe condition, shall be liable to a fine of not less than $50.00 dollars or more than $750.00 dollars. Each day that a violation continues after due notice has been served shall be deemed a separate offense. 17. Amend section 202 to insert the following definition: Code Official. The official, or a duly authorized representative, who is charged with the administration and enforcement of this Code, under the direction and approval of the director of planning & development or the Village Manager. 18. Amend section 302.2 to read as follows: 302.2 Grading And Drainage. All premises shall be graded and suitable vegetation or ground cover shall be established and maintained to prevent the erosion of soil by water or wind action and to prevent the accumulation of stagnant water thereon, or within any structure located thereon. 19. Delete section 302.4 in its entirety and substitute the following: 302.4 Weeds. The control of weeds shall be in accordance with title 7 health and sanitation, chapter 12 weeds, in the Glen Ellyn Village Code. X:\Plandev\Witt\2018 Code Upgrade\Meeting 3\Attachment IPMC-1 - Existing Amendments.docx Page 2 of 5 Page 25 of 59 Attachment IPMC-1 Property Maintenance Code – Existing Amendments 20. Delete section 302.8 in its entirety and substitute the following: 302.8 Motor Vehicles. The control of abandoned vehicles shall be in accordance with title 7 health and sanitation, chapter 8 abandoned vehicles, in the Glen Ellyn Village Code. 21. Amend section 302.9 to insert the following: 302.9 Defacement Of Property. The removal of graffiti shall be in accordance with title 7 health and sanitation, chapter 2 nuisances, in the Glen Ellyn Village Code. 22. Add new section 302.10 to read as follows: 302.10 Corner Lot Landscaping. All landscaping on corner lots within the visibility triangle shall be maintained in accordance with subsection 10-5-5(B)2 in the Glen Ellyn Village Code. 23. Add new section 302.11 to read as follows: 302.11 Composting. Yard waste materials from the premises and adjoining parkway may be placed in a compost pile or container(s) intended for composting use. The placement of materials other than grass, vegetation or leaves in a compost pile or container(s) which attracts animals or vermin or which causes an obnoxious odor is prohibited. One compost pile or container(s) shall be permitted on a zoning lot and shall not exceed .5% of the lot area and a maximum height of 4 feet. A compost pile or container(s) is only permitted in the rear yard and set back a minimum distance of 5% of the lot width, but not less than 3 feet, from any property line and not less than 30 feet from any adjacent residential dwelling and shall not be placed in a utility or storm water easement or in any location that obstructs the natural flow of storm water runoff. 24. Add new section 302.12 to read as follows: 302.12 Outdoor Storage. Outdoor storage of materials and equipment is prohibited except where specifically permitted in a zoning district, or in Zoning Code section 10-5-6, or where granted by ordinance as a special use. Material and equipment prohibited from being stored outdoors includes rubbish and garbage, construction and building materials, ice melting salt, soil or land fill material, brush and limbs, logs and firewood, snow removal equipment, landscaping equipment, construction equipment, furnishings and fixtures intended for use within a building and similar items. The following items are permitted to be stored outdoors when located in the rear yard and set back a minimum distance of 10% of the lot width, but not less than 6.5 feet, from any property line; rubbish and garbage in approved refuse containers, firewood not to exceed two face cords, outdoor cooking equipment, recreational equipment, and construction equipment and materials required for a current construction project. 25. Add new section 302.13 to read as follows: 302.13 Holiday Decorations. Holiday displays, lights, signs and temporary decorative items may be displayed for not more than 60 days. They may be displayed no sooner than 45 days prior to the holiday and must be removed no later than 60 days after the holiday. All displays that include electrical fixtures and equipment shall be installed in compliance with all requirements for temporary power and lighting in accordance with title 4 building regulations, chapter 2 Electrical Code, in the Glen Ellyn Village Code. 26. Add new section 304.3.1 to read as follows: 304.3.1 Unit Identification. Every dwelling unit and every commercial business unit that shares a common entrance door in a building with another unit shall be provided with a room, apartment, suite or other identification number. Identification numbers shall be Arabic numerals or alphabet letters with a minimum height of 2 inches and a minimum stroke width of .25 inches in a contrasting color with their background and shall be installed and maintained on or adjacent to the entrance door of the unit at a height not less than 5 feet or more than 6 feet above the floor. X:\Plandev\Witt\2018 Code Upgrade\Meeting 3\Attachment IPMC-1 - Existing Amendments.docx Page 3 of 5 Page 26 of 59 Attachment IPMC-1 Property Maintenance Code – Existing Amendments 27. Amend section 304.7 to read as follows: 304.7 Roofs And Drainage. Roof rain water, ground water or water within sump pits, pools, spas or other containers shall not be discharged in a manner that creates a public nuisance or increases or concentrates the natural water runoff flow causing soil erosion, or the accumulation of water, soil or debris, or a hazardous condition or damage on or to adjacent public or private property. Accumulated surface water on a property may be discharged to the public storm sewer in the street or other location with the prior approval of the director of public works. 28. Amend section 304.13 to read as follows: 304.13 Window, Skylight And Door Frames. No temporary repair of a broken or damaged window, skylight or door shall remain in place for more than 30 days unless an extension has been granted by the Code Official. 29. Amend section 304.14 to insert the following dates where indicated: April 1st to November 1st. 30. Delete section 305.1.1 in its entirety. 31. Delete section 305.2 in its entirety. 32. Delete section 305.3 in its entirety. 33. Delete section 305.4 in its entirety. 34. Delete section 305.5 in its entirety. 35. Delete section 305.6 in its entirety. 36. Delete section 308.1 in its entirety and substitute the following: 308.1 Accumulation Of Rubbish And Garbage. The control of rubbish and garbage shall be in accordance with title 7 health and sanitation, chapter 6 solid waste collection and disposal, in the Glen Ellyn Village Code. 37. Delete section 308.2 in its entirety. 38. Delete section 308.3 in its entirety. 39. Delete section 602.3 in its entirety and substitute the following: 602.3 Heat Supply. Heating requirements shall be in accordance with title 4 building regulations, chapter 1 Building Code, in the Glen Ellyn Village Code. 40. Amend section 602.4 to insert the following dates where indicated: October 1st to May 15th. 41. Delete section 606.1 in its entirety and substitute the following: 606.1 General. Elevators, dumbwaiters, escalators and lifts shall be maintained in compliance with the Safety Code for Elevators and Escalators (ASME A17.1-2007/CSA B44-07), Performance Based Safety Code for Elevators and Escalators (ASME A17.1-2007/CSA B44.7- 07), Guide for the Inspection of Elevators, Escalators and Moving Walks (ASME A17.2-2007), Safety Code for Existing Elevators and Escalators (ASME A17.3-2005), Safety Standard for Platform Lifts and Stairway Chairlifts (ASME A18.1-2005) and Standard for the Qualification of Elevator Inspectors (ASME QEI-1-2007) in accordance with the Elevator Safety Act (225 ILCS 312/) and the Administrative Code, title 41, chapter II, part 1000, administered by the Village of Glen Ellyn under a municipality program agreement with the Office of the Illinois Fire Marshal, State of Illinois. 42. Delete section 701.1 in its entirety and substitute the following: 701.1 General. All existing buildings, structures and premises shall be maintained in compliance with Illinois Code for safety to life from fire in buildings and structures, known as the 2009 NFPA X:\Plandev\Witt\2018 Code Upgrade\Meeting 3\Attachment IPMC-1 - Existing Amendments.docx Page 4 of 5 Page 27 of 59 Attachment IPMC-1 Property Maintenance Code – Existing Amendments 101 Life Safety Code current edition in accordance with the Fire Investigation Act (425 ILCS 25/) and the Administrative Code, title 41, chapter I, part 100, administered by the Office of the Illinois Fire Marshal, State of Illinois. 43. Delete section 702 in its entirety. 44. Delete section 703 in its entirety. 45. Delete section 704 in its entirety. (Ord. 5882, 8-23-2010, eff. 10-1-2010) X:\Plandev\Witt\2018 Code Upgrade\Meeting 3\Attachment IPMC-1 - Existing Amendments.docx Page 5 of 5 Page 28 of 59 Attachment IPMC-2 Property Maintenance Code – Proposed Amendments (Redlined) 4-1-12. - Adoption of Property Maintenance Code. (A) The 20182009 ICC International Property Maintenance Code is adopted by reference as the standards and regulations for the maintenance and occupancy of all existing property, buildings and structures as this Code is intended, recommended, maintained and published by the International Code Council except such portions thereof that are deleted, modified, or amended in this chapter. At least one copy of the ICC 20182009 International Property Maintenance Code shall be maintained on file in the office of the Village Clerk for inspection and copying as a public record. (B) The provisions of the 20182009 ICC International Property Maintenance Code are hereby deleted, modified and amended as follows: 1. Amend section 101.1 to read as follows: 101.1 Title. These regulations shall be known as the International Property Maintenance Code of the Village of Glen Ellyn, hereinafter referred to as "this Code". 2. Amend section 102.3 to read as follows: 102.3 Application of Other Codes. Repairs, additions or alterations to a structure, or changes of occupancy, shall be done in accordance with the procedures and provisions of the building and fire codes as adopted and amended by the Village of Glen Ellyn and nothing in this Code shall be constructed to cancel, modify or set aside any provision of the Illinois Code for safety to life from fire in buildings and structures (Life Safety Code), the Illinois Plumbing Code, the Illinois Aaccessibility Ccode, the Illinois Eenergy Cconservation Ccode or any other applicable rules or regulations established by the State of Illinois. 3. Amend the Exception in section 102.7 to read as follows: 102.7 Referenced Codes And Standards. Exceptions: 1. Wherever reference to the Iinternational Plumbing Code is made, substitute the Illinois Plumbing Code, Ddepartment of Ppublic Hhealth, State of Illinois. 2. Exception: Wherever reference to the Iinternational Zoning Code is made, substitute the Zoning Code, Ttitle 10 of the Glen Ellyn Village Code. Exception: All reference to the international existing Building Code shall be deleted. 3. Exception: Wherever differences occur between provisions of this Code and the 20152009 NFPA 101 Life Safety Code the most restrictive provisions shall apply. 4. Delete section 103.1 in its entirety and substitute the following: 103.1 General. Where referenced in this Code, the Ddepartment of Pproperty Mmaintenance shall be the planning and Community Ddevelopment Ddepartment of the Village of Glen Ellyn and the Code Official shall be the Building and Zoning Official of the Village of Glen Ellyn. 5. Delete section 103.5 in its entirety. X:\Plandev\Witt\2018 Code Upgrade\Meeting 3\Attachment IPMC-2 - Proposed Amendments (Redlined).docxX:\Plandev\Witt\2018 Code Upgrade\Meeting 3\IPMC-4 - Proposed Amendments (Clean).docx Page 1 of 6 Page 29 of 59 Attachment IPMC-2 Property Maintenance Code – Proposed Amendments (Redlined) 6. Add new section 104.3.1 to read as follows: 104.3.1 Search Warrant. If the Code Official is refused entry after a reasonable attempt to obtain consent to enter the premises to make an inspection, the Code Official may seek in the circuit court of DuPage County a search warrant. An owner, occupant or other person in charge of a dwelling, structure or property subject to the provisions of this Code, who is presented with a search warrant obtained pursuant to this section, shall not refuse, impede, inhibit, interfere with, restrict or obstruct entry and free access to any part of the structure or premises where an inspection authorized by search warrant is sought to be made. 7. Delete section 106.4 in its entirety and substitute the following: 106.4 Violation Penalties. Any person who violates a provision of this Code shall, upon conviction thereof, be subject to a fine of not less than $50.00 nor more than $750.00 unless a fine for the violation of this Code is listed in the Glen Ellyn Village Code then the more stringent shall apply. Each day that a violation continues after due notice has been served shall be deemed a separate offense. 8. Add new section 108.2.2 to read as follows: 108.2.2 Closing Safeguards. Vacant structures that are ordered to be closed and secured shall have all doors, windows and openings completely covered and securely fastened with solid weather resistant material to temporarily prevent access to the premises. The covering material shall match or be painted to match the general color of the structure. 9. Amend section 109.5 to read as follows: 109.5 Cost Oof Emergency Repairs And Temporary Safeguards. Costs incurred in the performance of emergency work and temporary safeguards shall be paid by the jurisdiction. The legal counsel of the jurisdiction shall institute appropriate action against the owner of the premises where the unsafe structure or condition is or was located for the recovery of such costs. 10. Delete section 111.2 in its entirety. 11. Delete section 111.3 in its entirety. 12. Delete section 111.4 in its entirety. 13. Delete section 111.5 in its entirety. 14. Delete section 111.6 in its entirety. 15. Delete section 111.7 in its entirety. 16. Amend section 112.4 to read as follows: 112.4 Failure To Comply. Any person who shall continue any work after having been served with a stop work order, except such work as that person is directed to perform to remove a violation or unsafe condition, shall be liable to a fine of not less than $50.00 dollars or more than $750.00 dollars. Each day that a violation continues after due notice has been served shall be deemed a separate offense. 17. Amend section 202 to insert the following definition: Code Official. The official, or a duly authorized representative, who is charged with the administration and enforcement of this Code, under the direction and approval of the Ddirector of planning & Community Ddevelopment or the Village Manager. X:\Plandev\Witt\2018 Code Upgrade\Meeting 3\Attachment IPMC-2 - Proposed Amendments (Redlined).docxX:\Plandev\Witt\2018 Code Upgrade\Meeting 3\IPMC-4 - Proposed Amendments (Clean).docx Page 2 of 6 Page 30 of 59 Attachment IPMC-2 Property Maintenance Code – Proposed Amendments (Redlined) 18. Amend section 302.2 to read as follows: 302.2 Grading And Drainage. All premises shall be graded and suitable vegetation or ground cover shall be established and maintained to prevent the erosion of soil by water or wind action and to prevent the accumulation of stagnant water thereon, or within any structure located thereon. 19. Delete section 302.4 in its entirety and substitute the following: 302.4 Weeds. The control of weeds shall be in accordance with Ttitle 7 Hhealth and Ssanitation, C-chapter 12 Wweeds Control Code, in the Glen Ellyn Village Code. 20. Delete section 302.8 in its entirety and substitute the following: 302.8 Motor Vehicles. The control of abandoned vehicles shall be in accordance with Ttitle 7 Hhealth and Ssanitation, Cchapter 8 Aabandoned Vvehicles, in the Glen Ellyn Village Code. 21. Amend section 302.9 to insert the following: 302.9 Defacement Of Property. The removal of graffiti shall be in accordance with Ttitle 7 Hhealth and Ssanitation, Cchapter 2 Nnuisances, in the Glen Ellyn Village Code. 22. Add new section 302.10 to read as follows: 302.10 Corner Lot Landscaping. All landscaping on corner lots within the visibility triangle shall be maintained in accordance with subsection 10-5-5(B)2 in the Glen Ellyn Village Code. 23. Add new section 302.11 to read as follows: 302.11 Composting. Yard waste materials from the premises and adjoining parkway may be placed in a compost pile or container(s) intended for composting use. The placement of materials other than grass, vegetation or leaves in a compost pile or container(s) which attracts animals or vermin or which causes an obnoxious odor is prohibited. One compost pile or container(s) shall be permitted on a zoning lot and shall not exceed .5% of the lot area and a maximum height of 4 feet. A compost pile or container(s) is only permitted in the rear yard and set back a minimum distance of 5% of the lot width, but not less than 3 feet, from any property line and not less than 30 feet from any adjacent residential dwelling and shall not be placed in a utility or storm water easement or in any location that obstructs the natural flow of storm water runoff. 24. Add new section 302.12 to read as follows: 302.12 Outdoor Storage. Outdoor storage of materials and equipment is prohibited except where specifically permitted in a zoning district, or in Zoning Code section 10-5-6, or where granted by ordinance as a special use. Material and equipment prohibited from being stored outdoors includes rubbish and garbage, construction and building materials, ice melting salt, soil or land fill material, brush and limbs, logs and firewood, snow removal equipment, landscaping equipment, construction equipment, furnishings and fixtures intended for use within a building and similar items. The following items are permitted to be stored outdoors when located in the rear yard and set back a minimum distance of 10% of the lot width, but not less than 6.5 feet, from any property line; rubbish and garbage in approved refuse containers, firewood not to exceed two face cords, outdoor cooking equipment, recreational equipment, and construction equipment and materials required for a current construction project. X:\Plandev\Witt\2018 Code Upgrade\Meeting 3\Attachment IPMC-2 - Proposed Amendments (Redlined).docxX:\Plandev\Witt\2018 Code Upgrade\Meeting 3\IPMC-4 - Proposed Amendments (Clean).docx Page 3 of 6 Page 31 of 59 Attachment IPMC-2 Property Maintenance Code – Proposed Amendments (Redlined) 25. Add new section 302.13 to read as follows: 302.13 Holiday Decorations. Holiday displays, lights, signs and temporary decorative items may be displayed for not more than 60 days. They may be displayed no sooner than 45 days prior to the holiday and must be removed no later than 60 days after the holiday. All displays that include electrical fixtures and equipment shall be installed in compliance with all requirements for temporary power and lighting in accordance with title 4 building regulations, chapter 2 Electrical Code, in the Glen Ellyn Village Code. 26. Add new section 302.14 to read as follows: 302.14 Vision Obstruction On Lots. Walls, fences, signs, landscape plant material (excluding grass, ground cover, or other approved ground stabilizing material), and other obstructions shall be prohibited in those portions of a lot: (A) Where the vision of drivers of motor vehicles and bicycles, and the safety of pedestrians walking along the sidewalk or street is unreasonably obstructed or interfered with. The maximum height of such 1. Shrubs and fences shall be maintained to a maximum height of 36 inches and tree branches shall be eight feet or higher within that triangular portion of a lot no less than twenty (20) feet away from the edge of a public sidewalk and a point not less than twenty (20) feet away from the edge of a driveway closest to a shared property line and measured along the edge of the public sidewalk, regardless of what property the driveway is located on. (B) Encumbered by a detention, drainage, or access easement. 27. Delete section 303.2 and the Exception in their entirety and substitute the following: 303.2 Enclosures. Private swimming pools, hot tubs and spas, containing water more than 24 inches in depth shall be completely surrounded by a fence or barrier installed, along with any gates and doors therein, in accordance with the procedures and provisions of the building codes as adopted and amended by the Village of Glen Ellyn. 286. Add new section 304.3.1 to read as follows: 304.3.1 Unit Identification. Every dwelling unit and every commercial business unit that shares a common entrance door in a building with another unit shall be provided with a room, apartment, suite or other identification number. Identification numbers shall be Arabic numerals or alphabet letters with a minimum height of 2 inches and a minimum stroke width of .25 inches in a contrasting color with their background and shall be installed and maintained on or adjacent to the entrance door of the unit at a height not less than 5 feet or more than 6 feet above the floor. 279. Amend section 304.7 to read as follows: 304.7 Roofs And Drainage. Roof rain water, ground water or water within sump pits, pools, spas or other containers shall not be discharged in a manner that creates a public nuisance or increases or concentrates the natural water runoff flow causing soil erosion, or the accumulation of water, soil or debris, or a hazardous condition or damage on or to adjacent public or private property. Accumulated surface water on a property may be discharged to the public storm sewer in the street or other location with the prior approval of the Ddirector of Ppublic Wworks. X:\Plandev\Witt\2018 Code Upgrade\Meeting 3\Attachment IPMC-2 - Proposed Amendments (Redlined).docxX:\Plandev\Witt\2018 Code Upgrade\Meeting 3\IPMC-4 - Proposed Amendments (Clean).docx Page 4 of 6 Page 32 of 59 Attachment IPMC-2 Property Maintenance Code – Proposed Amendments (Redlined) 3028. Amend section 304.13 to read as follows: 304.13 Window, Skylight And Door Frames. No temporary repair of a broken or damaged window, skylight or door shall remain in place for more than 30 days unless an extension has been granted by the Code Official. 2931. Amend section 304.14 to insert the following dates where indicated: April 1st to November 1st. 30. Delete section 305.1.1 in its entirety. 31. Delete section 305.2 in its entirety. 32. Delete section 305.3 in its entirety. 33. Delete section 305.4 in its entirety. 34. Delete section 305.5 in its entirety. 35. Delete section 305.6 in its entirety. 362. Delete section 308.1 in its entirety and substitute the following: 308.1 Accumulation Of Rubbish And Garbage. The control of rubbish and garbage shall be in accordance with Ttitle 7 Hhealth and Ssanitation, Cchapter 6 Ssolid Wwaste Ccollection and Ddisposal, in the Glen Ellyn Village Code. 373. Delete section 308.2 in its entirety. 3438. Delete section 308.3 in its entirety. 3539. Delete section 602.3 in its entirety and substitute the following: 602.3 Heat Supply. Heating requirements shall be in accordance with title 4 building regulations, chapter 1 Building Code, in the Glen Ellyn Village Code. 602.3 Heat Supply. Every owner and operator of any building who rents, leases, or lets one or more dwelling units or sleeping units on terms, either expressed or implied, to furnish heat to the occupants thereof shall supply heat during the period of October 1 st to May 15th to maintain a minimum temperature of 68°F (20°C) at a point three feet above the floor and two feet from exterior walls in all habitable rooms, bathrooms, and toilet rooms at design temperature. The installation of one or more portable space heaters shall not be used to achieve compliance with this section. 3640. Amend section 602.4 to insert the following dates where indicated: October 1st to May 15th. 3741. Delete section 606.1 in its entirety and substitute the following: 606.1 General. Elevators, dumbwaiters, escalators and lifts shall be maintained in compliance with the following codes Safety Code for Elevators and Escalators (ASME A17.1-2007/CSA B44-07), Performance Based Safety Code for Elevators and Escalators (ASME A17.1- 2007/CSA B44.7-07), Guide for the Inspection of Elevators, Escalators and Moving Walks (ASME A17.2-2007), Safety Code for Existing Elevators and Escalators (ASME A17.3-2005), Safety Standard for Platform Lifts and Stairway Chairlifts (ASME A18.1-2005) and Standard for the Qualification of Elevator Inspectors (ASME QEI-1-2007) in accordance with the Elevator Safety Act (225 ILCS 312/) and the Administrative Code, title 41, chapter II, part 1000, administered by the Village of Glen Ellyn under a municipality program agreement with the Office of the Illinois Fire Marshal, State of Illinois. A. Safety Code for Elevators and Escalators (ASME-A17.1/CSA B44-2019) and Performance- Based Safety Code for Elevators and Escalators (ASME A17.1-2012/CSA B44.7-07); X:\Plandev\Witt\2018 Code Upgrade\Meeting 3\Attachment IPMC-2 - Proposed Amendments (Redlined).docxX:\Plandev\Witt\2018 Code Upgrade\Meeting 3\IPMC-4 - Proposed Amendments (Clean).docx Page 5 of 6 Page 33 of 59 Attachment IPMC-2 Property Maintenance Code – Proposed Amendments (Redlined) B. Safety Code for Existing Elevators and Escalators (ASME A17.3-2005, but only as required under Section 35(h) and (i) of the Elevator Safety Act (225 ILCS 312/); C. Safety Standard for Platform Lifts and Stairway Chairlifts (ASME A18.1-2017); D. Standard for Qualification of Elevator Inspectors (ASME QEI-1-2018); and E. Automated People Mover Standards (ANSI/ASCE/T&DI 21-13). 3842. Delete section 701.1 in its entirety and substitute the following: 701.1 General. All existing buildings, structures and premises shall be maintained in compliance with Illinois Code for safety to life from fire in buildings and structures, known as the 20152009 NFPA 101 Life Safety Code current edition in accordance with the Fire Investigation Act (425 ILCS 25/) and the Administrative Code, title 41, chapter I, part 100, administered by the Office of the Illinois Fire Marshal, State of Illinois. 3943. Delete section 702 in its entirety. 44. Delete section 703 in its entirety. 45. Delete section 704 in its entirety. 40. Delete section 704.6 in its entirety and substitute the following: 704.6 Local single- and multiple-station smoke alarms. Local single- and multiple-station smoke alarms shall be installed in existing Group I-1 and R occupancies in accordance with the more restrictive requirements of Sections 704.6.1 through 704.6.3, or the State of Illinois Smoke Detector Act (425 ILCS 60/3). 41. Add section 704.8 to read as follows: 705.2 Continuity of service: Local smoke alarms and detectors that rely on a paid service subscription to provide notification to building occupants shall not be permitted. 42. Delete section 704.7.1 in its entirety and substitute the following: 705.1 General. Carbon monoxide alarms shall be installed in accordance with the more restrictive requirements of Section 1103.9 of the Fire Code, except that alarms in dwellings covered by the Residential Building Code shall be installed in accordance with section R315 of that code and the State of Illinois Carbon Monoxide Alarm Detector Act (430 ILCS 135/10). 43. Add section 705.2.1 to read as follows: 705.2 Continuity of service: Local carbon monoxide alarms that rely on a paid service subscription to provide notification to building occupants shall not be permitted. (Ord. 5882, 8-23-2010, eff. 10-1-2010) X:\Plandev\Witt\2018 Code Upgrade\Meeting 3\Attachment IPMC-2 - Proposed Amendments (Redlined).docxX:\Plandev\Witt\2018 Code Upgrade\Meeting 3\IPMC-4 - Proposed Amendments (Clean).docx Page 6 of 6 Page 34 of 59 Attachment IPMC-3 Property Maintenance Code – Proposed Amendments (Clean) 4-1-12. - Adoption of Property Maintenance Code. (A) The 2018 ICC International Property Maintenance Code is adopted by reference as the standards and regulations for the maintenance and occupancy of all existing property, buildings and structures as this Code is intended, recommended, maintained and published by the International Code Council except such portions thereof that are deleted, modified, or amended in this chapter. At least one copy of the ICC 2018 International Property Maintenance Code shall be maintained on file in the office of the Village Clerk for inspection and copying as a public record. (B) The provisions of the 2018 ICC International Property Maintenance Code are hereby deleted, modified and amended as follows: 1. Amend section 101.1 to read as follows: 101.1 Title. These regulations shall be known as the International Property Maintenance Code of the Village of Glen Ellyn, hereinafter referred to as "this Code". 2. Amend section 102.3 to read as follows: 102.3 Application of Other Codes. Repairs, additions or alterations to a structure, or changes of occupancy, shall be done in accordance with the procedures and provisions of the building and fire codes as adopted and amended by the Village of Glen Ellyn and nothing in this Code shall be constructed to cancel, modify or set aside any provision of the Illinois Code for safety to life from fire in buildings and structures (Life Safety Code), the Illinois Plumbing Code, the Illinois Accessibility Code, the Illinois Energy Conservation Code or any other applicable rules or regulations established by the State of Illinois. 3. Amend the Exception in section 102.7 to read as follows: Exceptions: 1. Wherever reference to the International Plumbing Code is made, substitute the Illinois Plumbing Code, Department of Public Health, State of Illinois. 2. Wherever reference to the International Zoning Code is made, substitute the Zoning Code, Title 10 of the Glen Ellyn Village Code. 3. Wherever differences occur between provisions of this Code and the 2015 NFPA 101 Life Safety Code the most restrictive provisions shall apply. 4. Delete section 103.1 in its entirety and substitute the following: 103.1 General. Where referenced in this Code, the Department of Property Maintenance shall be the Community Development Department of the Village of Glen Ellyn and the Code Official shall be the Building and Zoning Official of the Village of Glen Ellyn. 5. Delete section 103.5 in its entirety. X:\Plandev\Witt\2018 Code Upgrade\Meeting 3\Attachment IPMC-3 - Proposed Amendments (Clean).docx Page 1 of 5 Page 35 of 59 Attachment IPMC-3 Property Maintenance Code – Proposed Amendments (Clean) 6. Add new section 104.3.1 to read as follows: 104.3.1 Search Warrant. If the Code Official is refused entry after a reasonable attempt to obtain consent to enter the premises to make an inspection, the Code Official may seek in the circuit court of DuPage County a search warrant. An owner, occupant or other person in charge of a dwelling, structure or property subject to the provisions of this Code, who is presented with a search warrant obtained pursuant to this section, shall not refuse, impede, inhibit, interfere with, restrict or obstruct entry and free access to any part of the structure or premises where an inspection authorized by search warrant is sought to be made. 7. Delete section 106.4 in its entirety and substitute the following: 106.4 Violation Penalties. Any person who violates a provision of this Code shall, upon conviction thereof, be subject to a fine of not less than $50.00 nor more than $750.00 unless a fine for the violation of this Code is listed in the Glen Ellyn Village Code then the more stringent shall apply. Each day that a violation continues after due notice has been served shall be deemed a separate offense. 8. Add new section 108.2.2 to read as follows: 108.2.2 Closing Safeguards. Vacant structures that are ordered to be closed and secured shall have all doors, windows and openings completely covered and securely fastened with solid weather resistant material to temporarily prevent access to the premises. The covering material shall match or be painted to match the general color of the structure. 9. Amend section 109.5 to read as follows: 109.5 Cost of Emergency Repairs And Temporary Safeguards. Costs incurred in the performance of emergency work and temporary safeguards shall be paid by the jurisdiction. The legal counsel of the jurisdiction shall institute appropriate action against the owner of the premises where the unsafe structure or condition is or was located for the recovery of such costs. 10. Delete section 111.2 in its entirety. 11. Delete section 111.3 in its entirety. 12. Delete section 111.4 in its entirety. 13. Delete section 111.5 in its entirety. 14. Delete section 111.6 in its entirety. 15. Delete section 111.7 in its entirety. 16. Amend section 112.4 to read as follows: 112.4 Failure To Comply. Any person who shall continue any work after having been served with a stop work order, except such work as that person is directed to perform to remove a violation or unsafe condition, shall be liable to a fine of not less than $50.00 dollars or more than $750.00 dollars. Each day that a violation continues after due notice has been served shall be deemed a separate offense. 17. Amend section 202 to insert the following definition: Code Official. The official, or a duly authorized representative, who is charged with the administration and enforcement of this Code, under the direction and approval of the Director of Community Development or the Village Manager. X:\Plandev\Witt\2018 Code Upgrade\Meeting 3\Attachment IPMC-3 - Proposed Amendments (Clean).docx Page 2 of 5 Page 36 of 59 Attachment IPMC-3 Property Maintenance Code – Proposed Amendments (Clean) 18. Amend section 302.2 to read as follows: 302.2 Grading And Drainage. All premises shall be graded and suitable vegetation or ground cover shall be established and maintained to prevent the erosion of soil by water or wind action and to prevent the accumulation of stagnant water thereon, or within any structure located thereon. 19. Delete section 302.4 in its entirety and substitute the following: 302.4 Weeds. The control of weeds shall be in accordance with Title 7 Health and Sanitation, C-chapter 12 Weed Control Code, in the Glen Ellyn Village Code. 20. Delete section 302.8 in its entirety and substitute the following: 302.8 Motor Vehicles. The control of abandoned vehicles shall be in accordance with Title 7 Health and Sanitation, Chapter 8 Abandoned Vehicles, in the Glen Ellyn Village Code. 21. Amend section 302.9 to insert the following: 302.9 Defacement Of Property. The removal of graffiti shall be in accordance with Title 7 Health and Sanitation, Chapter 2 Nuisances, in the Glen Ellyn Village Code. 22. Add new section 302.10 to read as follows: 302.10 Corner Lot Landscaping. All landscaping on corner lots within the visibility triangle shall be maintained in accordance with subsection 10-5-5(B)2 in the Glen Ellyn Village Code. 23. Add new section 302.11 to read as follows: 302.11 Composting. Yard waste materials from the premises and adjoining parkway may be placed in a compost pile or container(s) intended for composting use. The placement of materials other than grass, vegetation or leaves in a compost pile or container(s) which attracts animals or vermin or which causes an obnoxious odor is prohibited. One compost pile or container(s) shall be permitted on a zoning lot and shall not exceed .5% of the lot area and a maximum height of 4 feet. A compost pile or container(s) is only permitted in the rear yard and set back a minimum distance of 5% of the lot width, but not less than 3 feet, from any property line and not less than 30 feet from any adjacent residential dwelling and shall not be placed in a utility or storm water easement or in any location that obstructs the natural flow of storm water runoff. 24. Add new section 302.12 to read as follows: 302.12 Outdoor Storage. Outdoor storage of materials and equipment is prohibited except where specifically permitted in a zoning district, or in Zoning Code section 10-5-6, or where granted by ordinance as a special use. Material and equipment prohibited from being stored outdoors includes rubbish and garbage, construction and building materials, ice melting salt, soil or land fill material, brush and limbs, logs and firewood, snow removal equipment, landscaping equipment, construction equipment, furnishings and fixtures intended for use within a building and similar items. The following items are permitted to be stored outdoors when located in the rear yard and set back a minimum distance of 10% of the lot width, but not less than 6.5 feet, from any property line; rubbish and garbage in approved refuse containers, firewood not to exceed two face cords, outdoor cooking equipment, recreational equipment, and construction equipment and materials required for a current construction project. X:\Plandev\Witt\2018 Code Upgrade\Meeting 3\Attachment IPMC-3 - Proposed Amendments (Clean).docx Page 3 of 5 Page 37 of 59 Attachment IPMC-3 Property Maintenance Code – Proposed Amendments (Clean) 25. Add new section 302.13 to read as follows: 302.13 Holiday Decorations. Holiday displays, lights, signs and temporary decorative items may be displayed for not more than 60 days. They may be displayed no sooner than 45 days prior to the holiday and must be removed no later than 60 days after the holiday. All displays that include electrical fixtures and equipment shall be installed in compliance with all requirements for temporary power and lighting in accordance with title 4 building regulations, chapter 2 Electrical Code, in the Glen Ellyn Village Code. 26. Delete section 303.2 and the Exception in their entirety and substitute the following: 303.2 Enclosures. Private swimming pools, hot tubs and spas, containing water more than 24 inches in depth shall be completely surrounded by a fence or barrier installed, along with any gates and doors therein, in accordance with the procedures and provisions of the building codes as adopted and amended by the Village of Glen Ellyn. 27. Add new section 304.3.1 to read as follows: 304.3.1 Unit Identification. Every dwelling unit and every commercial business unit that shares a common entrance door in a building with another unit shall be provided with a room, apartment, suite or other identification number. Identification numbers shall be Arabic numerals or alphabet letters with a minimum height of 2 inches and a minimum stroke width of .25 inches in a contrasting color with their background and shall be installed and maintained on or adjacent to the entrance door of the unit at a height not less than 5 feet or more than 6 feet above the floor. 28. Amend section 304.7 to read as follows: 304.7 Roofs And Drainage. Roof rain water, ground water or water within sump pits, pools, spas or other containers shall not be discharged in a manner that creates a public nuisance or increases or concentrates the natural water runoff flow causing soil erosion, or the accumulation of water, soil or debris, or a hazardous condition or damage on or to adjacent public or private property. Accumulated surface water on a property may be discharged to the public storm sewer in the street or other location with the prior approval of the Director of Public Works. 29. Amend section 304.13 to read as follows: 304.13 Window, Skylight And Door Frames. No temporary repair of a broken or damaged window, skylight or door shall remain in place for more than 30 days unless an extension has been granted by the Code Official. 30. Amend section 304.14 to insert the following dates where indicated: April 1st to November 1st. 31. Delete section 308.1 in its entirety and substitute the following: 308.1 Accumulation Of Rubbish And Garbage. The control of rubbish and garbage shall be in accordance with Title 7 Health and Sanitation, Chapter 6 Solid Waste Collection and Disposal, in the Glen Ellyn Village Code. 32. Delete section 308.2 in its entirety. 33. Delete section 308.3 in its entirety. 34. Delete section 602.3 in its entirety and substitute the following: 602.3 Heat Supply. Every owner and operator of any building who rents, leases, or lets one or more dwelling units or sleeping units shall supply heat during the period of October 1 st to May 15th to maintain a minimum temperature of 68°F (20°C) at a point three feet above the floor and X:\Plandev\Witt\2018 Code Upgrade\Meeting 3\Attachment IPMC-3 - Proposed Amendments (Clean).docx Page 4 of 5 Page 38 of 59 Attachment IPMC-3 Property Maintenance Code – Proposed Amendments (Clean) two feet from exterior walls in all habitable rooms, bathrooms, and toilet rooms at design temperature. The installation of one or more portable space heaters shall not be used to achieve compliance with this section. 35. Amend section 602.4 to insert the following dates where indicated: October 1st to May 15th. 36. Delete section 606.1 in its entirety and substitute the following: 606.1 General. Elevators, dumbwaiters, escalators and lifts shall be maintained in compliance with the following codes the Elevator Safety Act (225 ILCS 312/) and the Administrative Code, title 41, chapter II, part 1000, administered by the Village of Glen Ellyn under a municipality program agreement with the Office of the Illinois Fire Marshal, State of Illinois. A. Safety Code for Elevators and Escalators (ASME-A17.1/CSA B44-2019) and Performance- Based Safety Code for Elevators and Escalators (ASME A17.1-2012/CSA B44.7-07); B. Safety Code for Existing Elevators and Escalators (ASME A17.3-2005, but only as required under Section 35(h) and (i) of the Elevator Safety Act (225 ILCS 312/); C. Safety Standard for Platform Lifts and Stairway Chairlifts (ASME A18.1-2017); D. Standard for Qualification of Elevator Inspectors (ASME QEI-1-2018); and E. Automated People Mover Standards (ANSI/ASCE/T&DI 21-13). 37. Delete section 702 in its entirety. 38. Delete section 704.6 in its entirety and substitute the following: 704.6 Local single- and multiple-station smoke alarms. Local single- and multiple-station smoke alarms shall be installed in existing Group I-1 and R occupancies in accordance with the more restrictive requirements of Sections 704.6.1 through 704.6.3, or the State of Illinois Smoke Detector Act (425 ILCS 60/3). 39. Add section 704.8 to read as follows: 705.2 Continuity of service: Local smoke alarms and detectors that rely on a paid service subscription to provide notification to building occupants shall not be permitted. 40. Delete section 704.7.1 in its entirety and substitute the following: 705.1 General. Carbon monoxide alarms shall be installed in accordance with the more restrictive requirements of Section 1103.9 of the Fire Code, except that alarms in dwellings covered by the Residential Building Code shall be installed in accordance with section R315 of that code and the State of Illinois Carbon Monoxide Alarm Detector Act (430 ILCS 135/10). 41. Add section 705.2.1 to read as follows: 705.2 Continuity of service: Local carbon monoxide alarms that rely on a paid service subscription to provide notification to building occupants shall not be permitted. (Ord. 5882, 8-23-2010, eff. 10-1-2010) X:\Plandev\Witt\2018 Code Upgrade\Meeting 3\Attachment IPMC-3 - Proposed Amendments (Clean).docx Page 5 of 5 Page 39 of 59 Attachment IPMC-4 Major changes to the International Property Maintenance Code 2012, 2015 and 2018 Editions The following is an overview of major changes that have occurred in the International Code Council’s International Property Maintenance Code 2012, 2015 and 2018 editions. The information provided comes from a variety of sources, including: • International Property Maintenance Code 2012, 2015 and 2018 editions. Additions and deletions of code sections within each publication are identified in the margin adjacent to or between code sections. • Significant Changes to the International Property Maintenance Code 2012 and 2018 Edition. • International Code Council seminars on International Property Maintenance Code updates. • Evaluations performed by other municipalities if available. Items determined to have greater impact on the maintenance of existing buildings and properties within the Village are highlighted in yellow. 2012, 2015 and 2018 International Property Maintenance Code Code Amendment: Description 2018 Code Section Year New, Change or Addition 2012 Modification 102.3, 201.3, provides further provisions for repairs, 102.3, 201.3 additions, or alterations to the structure as well as changes of occupancy; including: International Energy Conservation Code, International Fire Code, International Fuel Gas Code, International Mechanical Code, International Residential Code, International Plumbing Code and NFPA 70. 2012 Addition 304.19 Gates, provides the opportunity to enforce the 304.19 condition of gates. 2012 Modification 404.4.1, 404.5 Overcrowding, provides formula for the 404.4.1, 404.5 proper amount of people per square foot. 2012 Modification 404.5.1 Sleeping Area, and 404.5.2 Combined spaces, 404.5.1, 404.5.2 provides descriptions for the use of size when determining occupancy load. 2012 Modification 404.6 Efficiency Unit, provides further details for size 404.6 compared to occupancy. 2012 Modification 506.3 Grease interceptors, provides enforcement for 506.3 proper maintenance of these devices. 2012 Modification 602.2 Residential Occupancies, provides guidelines 602.2 prohibiting the use of fuel burning space heaters and exceptions to the section. 2012 Modification 605.2 Receptacles, provides that each receptacle must 605.2 have the appropriate faceplate cover for the location. 2012 Modification 605.3 Luminaires, provides additional detail requiring a 605.3 ground to pool or spa luminaries over 15 V. X:\Plandev\Witt\2018 Code Upgrade\Meeting 3\Attachment IPMC-4 - Major Changes.docx Page 1 of 3 Page 40 of 59 2012 Modification 605.4 Wiring, provides addition details on wiring 605.4 luminaries. 2015 Updating 102.3, 201.3, provides further provisions to repairs, 102.3, 201.3 additions or alterations to the structure as well as changes of occupancy; including: International Existing Building Code, International Energy Conservation Code. 2015 Providing 102.7, when enforcement of a code provision would 102.7 exceptions violate the conditions of the listing of the equipment or appliance, the conditions of the listing shall apply. 2015 Addition 102.7.1 Conflicts, provides resolution to allow the 102.7.1 provisions of this code to apply 2015 Addition 102.7.2 Provisions in referenced codes and standards, 102.7.2 provides that the provisions of the IPMC takes precedence over provisions in referenced code. 2015 Addition Addition of “civil or criminally liable personally” to 103.4 Section 103.4 Liability, providing further legal coverage for employee(s) who are acting for the jurisdiction, in good faith and without malice in the discharge of the duties required by this code or other pertinent law or ordinance. 2015 Addition 105.2, requires the code official to provide reasons in 105.2 writing when an alternative is not approved. 2015 Addition Adding “owners authorized agent” to Sections 107.2, 107.2, 107.6, 107.6, 108.2, 108.2.1, 108.3, 108.6, 109.5, 110.1, 110.3, 108.2, 108.2.1, 112.2, allows city officials to place responsibility on 108.6, 109.5, property managers or business representatives as well 110.1, 110.3, 112.2 as the property owner. 2015 Addition Chapter 2. Definitions: Chapter 2 • Cost of Demolition defined • Emergency Repair defined. • Historical-Buildings requirements defined. Infestation, the term rodent was added. 2015 Addition 304.15 Doors. “Operator systems if provided” (allows 304.15 code officials to enforce the mechanics of a handicap door to remain operable for example). 2015 Addition 704.1.2 Fire Department Connection, provides 704.5 requirements for a sign indicating the location of the fire department connection when the connection is not visible to approaching fire apparatus. 2018 Modified Chapter 2. Definitions: Chapter 2 • Labeled, remove the word inspection. • Public Way, to include or other parcel of land that is open to the outside air; leads to street; and has a clear width of no less than 10 feet. • Structure: deleted “or a portion there of”. X:\Plandev\Witt\2018 Code Upgrade\Meeting 3\Attachment IPMC-4 - Major Changes.docx Page 2 of 3 Page 41 of 59 2018 New 505.5 Non-Potable water reuse systems, shall be 505.5 maintained. 2018 New 505.5.1 Abandonment of systems. Where a nonpotable 505.5.1 water reuse system or rainwater collection and distribution system is not maintained, it shall be abandoned. 2018 Addition 603.1 Mechanical appliances became Mechanical 603.1 equipment and appliances. 2018 Addition Imported requirements from the International Fire Code including: Section 703 Fire Resistance Ratings. 703.1 Fire resistive rated assemblies 703.2 Unsafe conditions 703.3 Maintenance 703.3.1 Fire blocking and draft stopping 703.3.2 Smoke barriers and smoke partitions 703.3.3 Fire walls, fire barriers, and fire partitions 703.4 Opening protectives 703.4.1 Signs 703.4.2 Hold open devices and closers 703.4.3 Door operation 703.5 Ceilings 703.6 Testing 703.7 Vertical shafts 703.8 Opening protective closures Imported requirements from the International Fire Code Section 704 Fire Protection Systems. IFC 901.6 704.1 Inspection, testing and maintenance IFC 901.4 704.1.1 Installation IFC 901.4.1 704.1.2 Required fire protection system 704.1.3 Fire protection systems IFC 901.6, 901.6.1 704.2 Standards (for inspecting, testing, and and 901.6.2 maintaining fire protection systems) 704.2.1 Records IFC 901.6.3 704.2.2 Records and information IFC 901.6.3.1. 704.3 System out of service IFC 907.1 704.3.1 Emergency impairments IFC 901.7.5 704.4.1 Removal of or tampering with appurtenance IFC 901.8.1 704.4.2 Removal of occupant use hose lines IFC 901.8.2 704.4.3 Termination of monitoring services IFC 901.9 704.5 Fire department connection IFC 903.3.7 704.5.1 Fire department connection access IFC 912.2 704.5.2 Clear space around connections IFC 912.4 X:\Plandev\Witt\2018 Code Upgrade\Meeting 3\Attachment IPMC-4 - Major Changes.docx Page 3 of 3 Page 42 of 59  Attachment LSC-1 Life Safety Code - Existing Amendments 5-2-2. Adoption of the Life Safety Code. (A) The 2009 NFPA 101 Life Safety Code is adopted by reference as the standards and regulations for governing conditions hazardous to life and property from fire, escape from buildings and fire protective building features and systems as this Code is intended, recommended, maintained and published by the National Fire Protection Association except such portions thereof that are deleted, modified, or amended in this chapter. At least one copy of the 2009 NFPA 101 Life Safety Code shall be maintained on file in the office of the Village Clerk for inspection and copying as a public record. (B) The provisions of the 2009 NFPA 101 Life Safety Code are hereby deleted, modified and amended as follows: 1. Amend section 2.2 to read as follows: 2.2 NFPA Publications. National Fire Protection Association, 1 Batterymarch Park, Quincy, MA 02169-7471. NFPA 101, Life Safety Code, 2000 edition, as amended by the State of Illinois in the administrative code, title 41, chapter I, part 100, section 100.7(b). 2. Delete chapter 24 one and two family dwellings in its entirety. (Ord. 5883, 8-23-2010, eff. 10-1-2010) X:\Plandev\Witt\2018 Code Upgrade\Meeting 3\Attachment LSC-1 - Existing Amendments.docx Page 1 of 1 Page 43 of 59 Attachment LSC-2 Life Safety Code - Proposed Amendments (Redlined) 5-2-2. Adoption of the Life Safety Code. 1. Delete Section 5-2-2 in its entirety. (A) The 2009 NFPA 101 Life Safety Code is adopted by reference as the standards and regulations for governing conditions hazardous to life and property from fire, escape from buildings and fire protective building features and systems as this Code is intended, recommended, maintained and published by the National Fire Protection Association except such portions thereof that are deleted, modified, or amended in this chapter. At least one copy of the 2009 NFPA 101 Life Safety Code shall be maintained on file in the office of the Village Clerk for inspection and copying as a public record. (B) The provisions of the 2009 NFPA 101 Life Safety Code are hereby deleted, modified and amended as follows: 1. Amend section 2.2 to read as follows: 2.2 NFPA Publications. National Fire Protection Association, 1 Batterymarch Park, Quincy, MA 02169-7471. NFPA 101, Life Safety Code, 2000 edition, as amended by the State of Illinois in the administrative code, title 41, chapter I, part 100, section 100.7(b). 2. Delete chapter 24 one and two family dwellings in its entirety. (Ord. 5883, 8-23-2010, eff. 10-1-2010) X:\Plandev\Witt\2018 Code Upgrade\Meeting 3\Attachment LSC-2 - Proposed Amendments (Redlined).docx Page 1 of 1 Page 44 of 59 Attachment LSC-3 Life Safety Code - Proposed Amendments (Clean) 5-2-2. Adoption of the Life Safety Code. 1. Delete Section 5-2-2 in its entirety. (Ord. 5883, 8-23-2010, eff. 10-1-2010) X:\Plandev\Witt\2018 Code Upgrade\Meeting 3\Attachment LSC-3 - Proposed Amendments (Clean).docx Page 1 of 1 Page 45 of 59 Page 46 of 59 Page 47 of 59 Page 48 of 59 Attachment IMC-1 Mechanical Code - Existing Amendments 4-1-7. Adoption of Mechanical Code. (A) The 2009 ICC International Mechanical Code is adopted by reference as the standards and regulations for governing the design and installation of mechanical systems, appliances, appliance venting, duct and ventilation systems, combustion air provisions, hydronic systems and solar systems, as this Code is intended, recommended, maintained and published by the International Code Council except such portions thereof as are deleted, modified, or amended in this chapter. At least one copy of the 2009 ICC International Mechanical Code shall be maintained on file in the office of the Village Clerk for inspection and copying as a public record. (B) The provisions of the 2009 ICC International Mechanical Code are hereby deleted, modified, and amended as follows: 1. Amend section 101.1 to read as follows: 101.1 Title. These regulations shall be known as the mechanical code of the Village of Glen Ellyn, hereinafter referred to as "this Code." 2. Add new section 101.5 to read as follows: 101.5 Administration And Enforcement. This Code shall be administered and enforced in accordance with the provisions in chapter 1 of the ICC International Building Code as adopted and amended by the Village of Glen Ellyn. 3. Delete section 103, Department of Mechanical Inspection, in its entirety. 4. Delete section 104, Duties and Powers of the Code Official, in its entirety. 5. Delete section 105, Approval, in its entirety. 6. Delete section 106, Permits, in its entirety. 7. Delete section 107, Inspections and Testing, in its entirety. 8. Delete section 108, Violations, in its entirety. 9. Delete section 109, Means of Appeal, in its entirety. 10. Delete section 110, Temporary Equipment, System And Uses, in its entirety. (Ord. 5967, 10-24-2011, eff. 12-5-2011) X:\Plandev\Witt\2018 Code Upgrade\Meeting 3\Attachment IMC-1 - Existing IMC Amendments.docx Page 1 of 1 Page 49 of 59 Attachment IMC-2 Mechanical Code - Proposed Amendments (Redlined) 4-1-7. Adoption of Mechanical Code. (A) The 20182009 ICC International Mechanical Code is adopted by reference as the standards and regulations for governing the design and installation of mechanical systems, appliances, appliance venting, duct and ventilation systems, combustion air provisions, hydronic systems and solar systems, as this Code is intended, recommended, maintained and published by the International Code Council except such portions thereof as are deleted, modified, or amended in this chapter. At least one copy of the 20182009 ICC International Mechanical Code shall be maintained on file in the office of the Village Clerk for inspection and copying as a public record. (B) The provisions of the 20182009 ICC International Mechanical Code are hereby deleted, modified, and amended as follows: 1. Amend section 101.1 to read as follows: 101.1 Title. These regulations shall be known as the mMechanical cCode of the Village of Glen Ellyn, hereinafter referred to as "this Code." 2. Add new section 101.5 to read as follows: 101.5 Administration Aand Enforcement. This Code shall be administered and enforced in accordance with the provisions in cChapter 1 of the ICC International Building Code as adopted and amended by the Village of Glen Ellyn. 3. Delete sSection 103, Department of Mechanical Inspection, in its entirety. 4. Delete sSection 104, Duties and Powers of the Code Official, in its entirety. 5. Delete sSection 105, Approval, in its entirety. 6. Delete sSection 106, Permits, in its entirety. 7. Delete sSection 107, Inspections and Testing, in its entirety. 8. Delete sSection 108, Violations, in its entirety. 9. Delete sSection 109, Means of Appeal, in its entirety. 10. Delete sSection 110, Temporary Equipment, System Aand Uses, in its entirety. (Ord. 5967, 10-24-2011, eff. 12-5-2011) X:\Plandev\Witt\2018 Code Upgrade\Meeting 3\Attachment IMC-2 - Proposed IMC Amendments (Redlined).docx Page 1 of 1 Page 50 of 59 Attachment IMC-3 Mechanical Code - Proposed Amendments (Clean) 4-1-7. Adoption of Mechanical Code. (A) The 2018 ICC International Mechanical Code is adopted by reference as the standards and regulations for governing the design and installation of mechanical systems, appliances, appliance venting, duct and ventilation systems, combustion air provisions, hydronic systems and solar systems, as this Code is intended, recommended, maintained and published by the International Code Council except such portions thereof as are deleted, modified, or amended in this chapter. At least one copy of the 2018 ICC International Mechanical Code shall be maintained on file in the office of the Village Clerk for inspection and copying as a public record. (B) The provisions of the 2018 ICC International Mechanical Code are hereby deleted, modified, and amended as follows: 1. Amend section 101.1 to read as follows: 101.1 Title. These regulations shall be known as the Mechanical Code of the Village of Glen Ellyn, hereinafter referred to as "this Code." 2. Add new section 101.5 to read as follows: 101.5 Administration and Enforcement. This Code shall be administered and enforced in accordance with the provisions in Chapter 1 of the ICC International Building Code as adopted and amended by the Village of Glen Ellyn. 3. Delete Section 103, Department of Mechanical Inspection, in its entirety. 4. Delete Section 104, Duties and Powers of the Code Official, in its entirety. 5. Delete Section 105, Approval, in its entirety. 6. Delete Section 106, Permits, in its entirety. 7. Delete Section 107, Inspections and Testing, in its entirety. 8. Delete Section 108, Violations, in its entirety. 9. Delete Section 109, Means of Appeal, in its entirety. 10. Delete Section 110, Temporary Equipment, System and Uses, in its entirety. (Ord. 5967, 10-24-2011, eff. 12-5-2011) X:\Plandev\Witt\2018 Code Upgrade\Meeting 3\Attachment IMC-3 - Proposed IMC Amendments (Clean).docx Page 1 of 1 Page 51 of 59 Attachment IMC-4 Major changes to the International Mechanical Code 2012, 2015 and 2018 Editions The following is an overview of major changes that have occurred in the International Code Council’s International Mechanical Code 2012, 2015 and 2018 editions. The information provided comes from a variety of sources, including: • International Mechanical Code 2012, 2015 and 2018 editions. Additions and deletions of code sections within each publication are identified in the margin adjacent to or between code sections. • Significant Changes to the International Mechanical Code 2012 and 2018 Edition. • International Code Council seminars on International Mechanical Code updates. • Evaluations performed by other municipalities if available. Items determined to have greater impact on the maintenance of existing buildings and properties within the Village are highlighted in yellow. 2012, 2015 and 2018 International Mechanical Code Code Amendment: Cost Description Year New, Change or Impact Addition Decrease Increase Unknown IMC Defines Increase 306.5 Equipment and Appliances on roofs. When 2012 mechanical equipment requires access to roofs or similar structures access shall require a permanent ladder not portable. IMC Revision Increase Table E 403.3 Outdoor air. Beauty salons and nail 2012 salons require increase in ventilation from 0 to .6 CFM/Ft2 IMC Revision unknown 404.1 Enclosed parking garages. Requires enclosed 2012 parking garages to be exhausted when activated by carbon monoxide detectors, nitrogen dioxide detectors or presence of occupants, not just intermittently. IMC New Increase 501.2 Independent exhaust systems. New section 2012 requires all exhaust systems such as for dryers, kitchen or food processing to be separated from all others. IMC New Increase 506.3.8, 506.3.9, 506.3.10, 506.3.11 and 506.7.1, 2012 Commercial Kitchen Hoods. Adds details on grease duct reservoirs, clean outs, openings and enclosure. IMC Clarifications Decrease 507 Commercial Kitchen Hoods, 507.2 addresses new 2012 types of cooking methods and allows exceptions for venting. IMC New Increase 601.4 exhaust ducts, chimneys and vents in plenum 2012 require greater sealing or separated by an enclosure of X:\Plandev\Witt\2018 Code Upgrade\Meeting 3\Attachment IMC-4 - Major Changes.docx Page 1 of 3 Page 52 of 59  approved materials per 602.2.1. Also addresses minimum wiring requirements in plenum. IMC New For 927 Radiant Heating System. All new section 2012 information IMC New For 928 Evaporative Cooling Equipment, All new section 2012 information IMC New Increase if Properties located in “Flood hazard condition” were 2012 property in identified at numerous locations thru this code to flood area. ensure that new installations take flooding into consideration. IMC New Decrease 106.1.1 “Annual Permit” New Provision Decrease An 2015 National Multi- annual permit for mechanical repairs can be issued to a Family Housing person, firm or corporation to perform mechanical Council work on individual mechanical system or equipment (NMHC) 2014 that has already been approved when they employ a qualified tradesperson. IMC Change Increase 307.2.5 Condensate disposal. Condensate drains are 2015 ICC Key allowed to discharge to small condensate pumps that Changes often clog with biological buildup, new code requires means of cleaning pipe without cutting pipe, requires blow-out tubes for cleaning. IMC Change Increase 307.2.5 Condensate pumps. These pumps are often 2015 ICC Key located in remote locations that when drain lines are Changes clogged, and condensate water leaks out, can cause damage. New code requires these pumps to have floats with alarm notification. IMC Change Increase 403.3.2 Mechanical Ventilation. New Provision Increase 2015 NMHC 2014 Ventilation requirements for R-2 occupancies three stories or less in height have been completely revised to include requirements for inclusion of mechanical exhaust and supply for each dwelling unit. IMC New New option 514.2 Energy Recovery Ventilator. These ventilators, 2015 ICC Key often used in commercial kitchens, now allows for a Changes heat recovery system that utilizes oil or refrigerant in coiled tubes as means of recovering heat as is less hazardous. IMC Change Increase in 602.2.1.5 Materials in plenums. Further defines that 2015 ICC Key inspections accessory materials used for plumbing, HVAC, Changes mechanical and fire sprinkler shall be meet UL2043 for plenum fire and smoke rating. IMC Change Increase 701.2 Damper openings. Requires dampers to be tied 2015 ICC Key to the associated appliance to prevent damage when Changes damper is closed. IMC Change Increase in 802.9 Door swing. Side vented appliances have side 2015 ICC Key inspections vent terminals that can be obstructed or damaged by Changes swinging doors and can create back up of pressure or fumes, requires clearances be maintained with stops and door swing location. X:\Plandev\Witt\2018 Code Upgrade\Meeting 3\Attachment IMC-4 - Major Changes.docx Page 2 of 3 Page 53 of 59 IMC Change Clarification 903.4 Gasketed fire doors on wood burning fireplaces. 2015 ICC Key These types of doors are now prohibited on factory- Changes built fireplaces except when the fireplace is listed with such doors. IMC New Increase 106.1.1. Commercial kitchen hoods. Added definition 2018 ICC Key for pollution control units for grease and exhaust duct Changes systems to extract spoke and grease odors by filtering. IMC New Increase 506.5.2 Commercial kitchen hood. Pollution control 2018 ICC Key units. Extensive new section defining equipment and Changes standards to limit smoke and grease discharge. IMC New Decrease 507.2.6 Commercial kitchen hood. Recognizes Type I 2018 ICC Key kitchen hoods for clearances to combustible of less than Changes 18 inches that are labeled and listed. IMC New Decrease 603.5.2 Ducts. Non-metal, phenolic duct now allowed. 2018 material is approximately 1 inch thick rigid insulation with taped seams, light weight and faster to install. IMC New Energy 929.1 Appliances. Addresses high volume large diameter 2018 savings fans (HVLD), also referred to as high volume low speed (HVLS) fans. IMC Revision Not as 603.9 Ducts. Joints, seams and connections. Relaxed 2018 stringent, sealing of duct joints and seams for snap-and button- Decrease lock duct joints located within the thermal envelope. IMC New Increase 805.7 Duct insulation shields. Metal shield shall be 2018 provided to separate insulation from factory build chimneys. IMC New Increase Chapter 14 - Solar Thermal Heating. This chapter has 2018 been expanded from one page to three pages of code that addresses all aspects. X:\Plandev\Witt\2018 Code Upgrade\Meeting 3\Attachment IMC-4 - Major Changes.docx Page 3 of 3 Page 54 of 59 Attachment IFGC-1 Fuel Gas Code - Existing Amendments 4-1-13. Adoption of Fuel Gas Code. (A) The 2009 ICC International Fuel Gas Code is adopted by reference as the standards and regulations for governing the design and installation of fuel gas equipment and appliances, fuel gas piping and venting systems, and gaseous hydrogen systems and related accessories, as this Code is intended, recommended, maintained and published by the International Code Council except such portions thereof as are deleted, modified, or amended in this chapter. At least one copy of the 2009 ICC International Fuel Gas Code shall be maintained on file in the office of the Village Clerk for inspection and copying as a public record. (B) The provisions of the 2009 ICC International Fuel Gas Code are hereby deleted, modified, and amended as follows: 1. Amend section 101.1 to read as follows: 101.1 Title. These regulations shall be known as the fuel gas code of the Village of Glen Ellyn, hereinafter referred to as "this Code." 2. Add new section 101.6 to read as follows: 101.6 Administration and Enforcement. This Code shall be administered and enforced in accordance with the provisions in chapter 1 of the ICC International Building Code as adopted and amended by the Village of Glen Ellyn. 3. Delete section 103, Department of Inspection, in its entirety. 4. Delete section 104, Duties and Powers of the Code Official, in its entirety. 5. Delete section 105, Approval, in its entirety. 6. Delete section 106, Permits, in its entirety. 7. Delete section 107, Inspections and Testing, in its entirety. 8. Delete section 108, Violations, in its entirety. 9. Delete section 109, Means of Appeal, in its entirety. 10. Delete section 110, Temporary Equipment, System and Uses, in its entirety. 11. Amend section 303.3 item 4 to read as follows: 4. A single wall-mounted unvented room heater is installed in a bedroom and such unvented room heater is equipped as specified in section 621.6 and has an input rating not greater than 10,000 Btu/h (2.93 kW). The bedroom shall meet the required volume criteria of section 304.5 and be provided with a carbon monoxide detector that is listed and labeled by an approved testing agency. (Ord. 5992, 1-9-2012, eff. 2-1-2012) X:\Plandev\Witt\2018 Code Upgrade\Meeting 3\Attachment IFGC-1 - Existing IFGC Amendments.docx Page 1 of 1 Page 55 of 59 Attachment IFGC-2 Fuel Gas Code - Proposed Amendments (Redlined) 4-1-13. Adoption of Fuel Gas Code. (A) The 20182009 ICC International Fuel Gas Code is adopted by reference as the standards and regulations for governing the design and installation of fuel gas equipment and appliances, fuel gas piping and venting systems, and gaseous hydrogen systems and related accessories, as this Code is intended, recommended, maintained and published by the International Code Council except such portions thereof as are deleted, modified, or amended in this chapter. At least one copy of the 20182009 ICC International Fuel Gas Code shall be maintained on file in the office of the Village Clerk for inspection and copying as a public record. (B) The provisions of the 20182009 ICC International Fuel Gas Code are hereby deleted, modified, and amended as follows: 1. Amend section 101.1 to read as follows: 101.1 Title. These regulations shall be known as the fFuel gGas cCode of the Village of Glen Ellyn, hereinafter referred to as "this Code." 2. Add new sSection 101.6 to read as follows: 101.6 Administration and Enforcement. This Code shall be administered and enforced in accordance with the provisions in cChapter 1 of the ICC International Building Code as adopted and amended by the Village of Glen Ellyn. 3. Delete sSection 103, Department of Inspection, in its entirety. 4. Delete sSection 104, Duties and Powers of the Code Official, in its entirety. 5. Delete sSection 105, Approval, in its entirety. 6. Delete sSection 106, Permits, in its entirety. 7. Delete sSection 107, Inspections and Testing, in its entirety. 8. Delete sSection 108, Violations, in its entirety. 9. Delete sSection 109, Means of Appeal, in its entirety. 10. Delete sSection 110, Temporary Equipment, System and Uses, in its entirety. 11. Amend sSection 303.3 item 4 to read as follows: 4. A single wall-mounted unvented room heater is installed in a bedroom and such unvented room heater is equipped as specified in section 621.6 and has an input rating not greater than 10,000 Btu/h (2.93 kW). The bedroom shall meet the required volume criteria of section 304.5 and be provided with a carbon monoxide detector that is listed and labeled by an approved testing agency. (Ord. 5992, 1-9-2012, eff. 2-1-2012) X:\Plandev\Witt\2018 Code Upgrade\Meeting 3\Attachment IFGC-2 - Proposed IFGC Amendments (Redlined).docx Page 1 of 1 Page 56 of 59 Attachment IFGC-3 Fuel Gas Code - Proposed Amendments (Clean) 4-1-13. Adoption of Fuel Gas Code. (A) The 2018 ICC International Fuel Gas Code is adopted by reference as the standards and regulations for governing the design and installation of fuel gas equipment and appliances, fuel gas piping and venting systems, and gaseous hydrogen systems and related accessories, as this Code is intended, recommended, maintained and published by the International Code Council except such portions thereof as are deleted, modified, or amended in this chapter. At least one copy of the 2018 ICC International Fuel Gas Code shall be maintained on file in the office of the Village Clerk for inspection and copying as a public record. (B) The provisions of the 2018 ICC International Fuel Gas Code are hereby deleted, modified, and amended as follows: 1. Amend section 101.1 to read as follows: 101.1 Title. These regulations shall be known as the Fuel Gas Code of the Village of Glen Ellyn, hereinafter referred to as "this Code." 2. Add new Section 101.6 to read as follows: 101.6 Administration and Enforcement. This Code shall be administered and enforced in accordance with the provisions in Chapter 1 of the ICC International Building Code as adopted and amended by the Village of Glen Ellyn. 3. Delete Section 103, Department of Inspection, in its entirety. 4. Delete Section 104, Duties and Powers of the Code Official, in its entirety. 5. Delete Section 105, Approval, in its entirety. 6. Delete Section 106, Permits, in its entirety. 7. Delete Section 107, Inspections and Testing, in its entirety. 8. Delete Section 108, Violations, in its entirety. 9. Delete Section 109, Means of Appeal, in its entirety. 10. Delete Section 110, Temporary Equipment, System and Uses, in its entirety. 11. Amend Section 303.3 item 4 to read as follows: 4. A single wall-mounted unvented room heater is installed in a bedroom and such unvented room heater is equipped as specified in section 621.6 and has an input rating not greater than 10,000 Btu/h (2.93 kW). The bedroom shall meet the required volume criteria of section 304.5 and be provided with a carbon monoxide detector that is listed and labeled by an approved testing agency. (Ord. 5992, 1-9-2012, eff. 2-1-2012) X:\Plandev\Witt\2018 Code Upgrade\Meeting 3\Attachment IFGC-3 - Proposed IFGC Amendments (Clean).docx Page 1 of 1 Page 57 of 59 Attachment IFGC-4 Major changes to the International Fuel Gas Code 2012, 2015 and 2018 Editions The following is an overview of major changes that have occurred in the International Code Council’s International Fuel Gas Code 2012, 2015 and 2018 editions. The information provided comes from a variety of sources, including: • International Fuel Gas Code 2012, 2015 and 2018 editions. Additions and deletions of code sections within each publication are identified in the margin adjacent to or between code sections. • Significant Changes to the International Fuel Gas Code 2012 and 2018 Edition. • International Code Council seminars on International Fuel Gas Code updates. • Evaluations performed by other municipalities if available. Items determined to have greater impact on the maintenance of existing buildings and properties within the Village are highlighted in yellow. 2012, 2015 and 2018 International Fuel Gas Code Code Amendment Cost Description Year New, Change or Impact Addition. Decrease Increase Unknown IFGC Addition Increase Section 202 Definitions was expanded to include: 2012 Combustible assembly, Combustible material, Excess flow valve, Flashback arrestor check valve, Non- combustible material, Third party cortication agency, Third party certified, Third party tested IFGC Clarification Increase 202 Gypsum board is now considered a combustible 2012 material thus a minimum of a three-foot clearance is required on the supply plenum side of heat producing appliance. IFGC Addition 404.2 Clarifies that corrugated stainless steel tubing shall 2012 comply with their listing and manufactures installation instructions. IFGC Modification Decrease 408.4 Sediment trap. Decorative vented gas appliances 2012 and fireplaces are no longer required to install with a sediment trap. IFGC Modification 618.4 Prohibited sources. Outdoor or return air for 2012 forced air heating and cooling shall not be prohibited from taking return air from the garage. IFGC Modification Limits 310.1 Corrugated stainless steel tubing bonding jumper 2015 lengths limited to 75 feet in length to prevent lighting strike damage. 310.3 A new Section was added to recognize arc-resistant Corrugated stainless steel tubing products. IFGC New increase IFGC 307.6 A/C Condensation Pumps New Provision 2015 National Multi- Increase Condensation pumps located in attics, crawl X:\Plandev\Witt\2018 Code Upgrade\Meeting 3\Attachment IFGC-4 - Major Changes.docx Page 1 of 2 Page 58 of 59  Family Housing spaces and other uninhabited spaces must have controls Council that shut down the appliance upon failure of the pumping system. IFGC New Increase 404.7 “Protection Against Physical Damage” New 2015 National Multi- Provision Increase Provisions added to protect Family Housing concealed pipe and tubing from penetration by nails, Council screws and other fasteners. IFGC Added Increase 404.18 pipe cleaning added to prevent use of flammable 2015 cleaners and 406.7 purging of piping was modified due to a significant explosion. IFGC Modified Increase 411.1.1 Commercial cooking appliances can no longer 2015 utilize semi-ridged metal tubing between gas delivery piping and the appliance, flexible gas lines now required. IFGC Modification decrease 403.4.2 The code now allows Schedule 10 steel pipe to 2018 be used, whereas previously, Schedule 40 was the lightest steel pipe material allowed. Schedule 10 steel pipe joints are allowed to be welded, brazed, flanged or assembled with press-connect fittings. Schedule 10 pipe cannot be threaded. IFGC Clarification Increase 409.5.1 The code clarifies that appliance shutoff valves 2018 located behind movable appliances, such as ranges and clothes dryers, are considered to be provided with the required access. IFGC New 503.4.1 The code now calls for the plastic vent pipe 2018 material to be labeled as complying with the standards for the specific pipe material as called out by the manufacturer. IFGC Clarification Table 503.8 The clearances between direct-vent 2018 appliance vent terminals and openings in the building exterior that could allow combustion products to enter the building have been revised. X:\Plandev\Witt\2018 Code Upgrade\Meeting 3\Attachment IFGC-4 - Major Changes.docx Page 2 of 2 Page 59 of 59